Configuring remote paths for VSP E series and VSP G/F350, G/F370, G/F700, G/F900 storage systems

Ops Center High Availability User Guide

File Size
3.9 MB
Part Number

Use Storage Advisor Embedded to configure remote paths between the primary and secondary storage systems.

  • Connect the physical paths between the two storage systems making up the global-active device environment.
  • Identify the following items:
    • The model and serial number of the connection-destination storage system
    • The ID of the path group
    • The port to be used on the connection-source storage system and the port of the connection-destination storage system
  1. In the High Availability Setup page, open the Remote Paths menu, then click Launch for Primary Storage or Launch for Secondary Storage to open the Create Remote Path Group page in Storage Advisor Embedded.
  2. In the navigation bar, click Others > Remote Path Groups.
  3. Click the plus sign (+).

    Configure remote paths with Storage Advisor Embedded

  4. Specify the required items, and then configure the remote path.
  5. Click the ID of the path group to open the details page. Make sure that the status of the remote path you configured is Normal.