You need to check the status of the quorum disk before you replace the external storage system currently used by the quorum disk while you keep GAD pairs.
You can check the quorum disk status using the raidcom get quorum command. For details, see the Command Control Interface Command Reference.
You can replace the external storage system currently used by the quorum disk with a new external storage system while keeping GAD pairs.
There are five statuses for the quorum disk.
| Quorum disk status | Display by CCI | Description |
|---|---|---|
|
Normal |
NORMAL |
The quorum disk is operating normally. |
|
Transitioning |
TRANSITIONING |
The status of the quorum disk is being changed. |
|
Blocked |
BLOCKED |
The quorum disk is blocked. |
|
Replacing |
REPLACING |
The quorum disk is being replaced. |
|
Failed |
FAILED |
The primary and secondary storage systems are connected to different quorum disks. Specify the external volume again, so that they can be connected to the same quorum disk, and reconfigure the quorum disk. |
| - (Hyphen) | - (Hyphen) | No volume is set for the quorum disk. |