Port requirements

The following lists the port requirements for Ops Center Administrator.

Ops Center Administrator ports and firewall settings

Ensure that the port numbers specified for use by the Ops Center Administrator server are different from the port numbers used by other programs installed on the same computer.

Table. Ports used by the Ops Center Administrator server
Port number	Description
80/tcp	Used for accessing the Ops Center Administrator UI from Ops Center Administrator clients.
443/tcp	Used for accessing the Ops Center Administrator UI from Ops Center Administrator clients. Note: If you are using Ops Center Administrator with Ops Center Common Services or Ops Center Protector, you must use a port other than the default (443), which causes a conflict. We suggest 20961/tcp.
161/tcp	Reserved.
161/udp	Reserved.
162/tcp	Reserved.
162/udp	Used for receiving SNMP traps from supported storage systems and file servers. You cannot change the settings by using Ops Center Administrator. If products using these ports are installed on the same computer, change the settings of those products.
8085/tcp	Used to manage internal services included in the container runtime.

In an environment with firewalls set up in the network that connects the Ops Center Administrator server, Ops Center Administrator clients, and storage systems, you must register ports used by Ops Center products as firewall exceptions.

Table. Port numbers to register as firewall exceptions between the Ops Center Administrator server and the Ops Center Administrator client
Originator		Destination
Port number	Machine	Port number	Machine
any/tcp	Ops Center Administrator client	80/tcp	Ops Center Administrator server
any/tcp	Ops Center Administrator client	443/tcp or 20961/tcp (If using Ops Center Administrator with Ops Center Common Services or Ops Center Protector, you must use a port other than the default (443) and 20961 is recommended.)	Ops Center Administrator server

Table. Port numbers to register as firewall exceptions between the Ops Center Administrator server and storage systems
Originator		Destination		Remarks
Port number	Machine	Port number	Machine	Remarks
any/udp	VSP 5000 series VSP E series VSP G1x00, VSP F1500 VSP G200, G/F400, G/F600, G/F800 (controller) VSP G/F350, G/F370, G/F700, G/F900 (controller) VSP N series (controller)	162/udp	Ops Center Administrator server	-
any/tcp	Ops Center Administrator server	443/tcp	VSP 5000 series VSP E series (SVP/controller) VSP G1x00, VSP F1500 VSP G200, G/F400, G/F600, G/F800 (SVP/controller) VSP G/F350, G/F370, G/F700, G/F900 (SVP/controller) VSP N series (SVP/controller) Virtual Storage Software block	You can change the port number for the following models: VSP E series VSP G200, G/F400, G/F600, G/F800 (SVP) VSP G/F350, G/F370, G/F700, G/F900 (SVP) VSP N series (SVP)
any/tcp	Ops Center Administrator server	1099/tcp	VSP E series (SVP) VSP G1x00, VSP F1500 VSP G200, G/F400, G/F600, G/F800 (SVP) VSP G/F350, G/F370, G/F700, G/F900 (SVP) VSP N series (SVP)	-
any/tcp	Ops Center Administrator server	11099/tcp	VSP 5000 series	-
any/tcp	Ops Center Administrator server	51099/tcp	VSP 5000 series VSP E series (SVP) VSP G1x00, VSP F1500 VSP G200, G/F400, G/F600, G/F800 (SVP) VSP G/F350, G/F370, G/F700, G/F900 (SVP) VSP N series (SVP)	-
any/tcp	Ops Center Administrator server	51100/tcp	VSP 5000 series VSP G1x00, VSP F1500	Unused port numbers are allocated automatically from the described range during storage system registration and a firewall is also set. The allocated ports numbers are used when starting the storage system. For details on how to confirm the port numbers that the SVP uses, see the documentation for the storage system.
any/tcp	Ops Center Administrator server	51100-51355/tcp	VSP E series (SVP) VSP G200, G/F400, G/F600, G/F800 (SVP) VSP G/F350, G/F370, G/F700, G/F900 (SVP) VSP N series (SVP)	Unused port numbers are allocated automatically from the described range during storage system registration and a firewall is also set. The allocated ports numbers are used when starting the storage system. For details on how to confirm the port numbers that the SVP uses, see the documentation for the storage system.
34001-34008/udp	Ops Center Administrator server	31001/udp	VSP 5000 series VSP G1x00, VSP F1500	-
34001-34008/udp	Ops Center Administrator server	31001-31002/udp	VSP E series (controller) VSP G200, G/F400, G/F600, G/F800 (controller) VSP G/F350, G/F370, G/F700, G/F900 (controller) VSP N series (controller)	-
any/tcp	Ops Center Administrator server	8443/tcp	VSP G200, G/F400, G/F600, G/F800 (controller) in which a NAS Module is included VSP G/F350, G/F370, G/F700, G/F900 (controller) VSP N series (controller)	This setting is required when using a NAS Manager that exists on a storage system with a built-in NAS module.

Table. Port numbers to register as firewall exceptions between the Ops Center Administrator client and storage systems
Originator		Destination		Remarks
Port number	Machine	Port number	Machine	Remarks
any/tcp	Ops Center Administrator client	443/tcp	VSP 5000 series VSP E series VSP G1x00, F1500 VSP G200, G/F400, G/F600, G/F800 (SVP) VSP G/F350, G/F370, G/F700, G/F900 (SVP) VSP N series models (SVP) Virtual Storage Software block	This setting is required when using SSL for Storage Navigator. For VSP E series (SVP) VSP G200, G/F400, G/F600, G/F800 (SVP) VSP G/F350, G/F370, G/F700, G/F900 (SVP) VSP N series models (SVP). You can also change the port number.
any/tcp	Ops Center Administrator client	1099/tcp	VSP E series (SVP) VSP G1x00, F1500 VSP G200, G/F400, G/F600, G/F800 (SVP) VSP G/F350, G/F370, G/F700, G/F900 (SVP) VSP N series models (SVP)	-
any/tcp	Ops Center Administrator client	11099/tcp	VSP 5000 series	-
any/tcp	Ops Center Administrator client	51099/tcp	VSP 5000 series VSP E series (SVP) VSP G1x00, F1500 VSP G200, G/F400, G/F600, G/F800 (SVP) VSP G/F350, G/F370, G/F700, G/F900 (SVP) VSP N series models (SVP)	-
any/tcp	Ops Center Administrator client	51100/tcp	VSP 5000 series VSP G1x00, F1500	Unused port numbers are allocated automatically from the described range during storage system registration and a firewall is also set. The allocated ports numbers are used when starting the storage system. For details on how to confirm the port numbers used, see the documentation for your storage system.
any/tcp	Ops Center Administrator client	51100-51355/tcp	VSP E series (SVP) VSP G200, G/F400, G/F600, G/F800 (SVP) VSP G/F350, G/F370, G/F700, G/F900 (SVP) VSP N series (SVP)	Unused port numbers are allocated automatically from the described range during storage system registration and a firewall is also set. The allocated ports numbers are used when starting the storage system. For details on how to confirm the port numbers used, see the documentation for your storage system.
any/tcp	Ops Center Administrator client	any/tcp	VSP 5000 series VSP E series (SVP) VSP G200, G/F400, G/F600, G/F800 (SVP) VSP G/F350, G/F370, G/F700, G/F900 (SVP) VSP N series (SVP)	This setting is required for secure communication between the storage system and Ops Center Administrator when launching Storage Navigator.

Table. Port numbers to register as firewall exceptions between the Ops Center Administrator server and the Ops Center Protector server
Originator		Destination		Remarks
Port number	Machine	Port number	Machine	Remarks
any/tcp	Ops Center Administrator server	443/tcp	Ops Center Protector server	This setting is required when adding or deleting High Availability pairs.

Table. Port numbers to register as firewall exceptions between the Ops Center Administrator server and AD authentication servers
Originator		Destination		Remarks
Port number	Machine	Port number	Machine	Remarks
any/tcp	Ops Center Administrator server	389/tcp	AD server	Currently, only Microsoft Active Directory is supported for LDAP authentication. This port number is generally used. However, a different port number might be used for an authentication server.
any/tcp	Ops Center Administrator server	53/tcp	DNS server	The DNS server is required when using AD authentication.
any/udp	Ops Center Administrator server	53/udp	DNS server	The DNS server is required when using AD authentication.

Table. Port numbers to register as firewall exceptions between the Ops Center Administrator server and fabric switches
Originator		Destination		Remarks
Port number	Machine	Port number	Machine	Remarks
any/tcp	Ops Center Administrator server	22/tcp*	Fabric switch	This setting is required when changing zone settings according to attaching or detaching volumes. This port number is generally used. However, a different port number might be used for fabric switches.

Table. Port numbers to register as firewall exceptions between the Ops Center Administrator server and SNMP managers
Originator		Destination		Remarks
Port number	Machine	Port number	Machine	Remarks
any/udp	Ops Center Administrator server	162/udp	SNMP manager	This setting is required when an SNMP manager receives SNMP traps from Ops Center Administrator.