If Ops Center Administrator is not available and you have an administrator login account with the required permissions, you can log in directly to Device Manager - Storage Navigator.
Verify the following:
- You are managing one of the following storage systems:
- VSP 5000 series
- VSP E series
- VSP G1x00, F1500
- VSP G200, G/F400, G/F600, G/F800
- VSP G/F350, G/F370, G/F700, G/F900,
- You have an Ops Center Administrator login account with the required permissions. For information on creating user accounts in Storage Navigator, see the documentation for your storage system.
-
Start a web browser.
-
Enter the URL:
- For VSP E590, E790, E590H, or E790H storage systems, enter https://IP-address-or-host-name-of-the-SVP/dev/storage/9340006XXXXX/emergency.do (where the model number is '934000' and '6XXXXX' indicates the system serial number)
- For VSP E990 storage systems, enter https://IP-address-of-the-SVP/dev/storage/9360004XXXXX/emergency.do (where the model number is '936000' and '4XXXXX' indicates the system serial number)
- For VSP E1090 or E1090H storage systems, enter https://IP-address-of-the-SVP/dev/storage/9380007XXXXX/emergency.do (where the model number is '938000' and '7XXXXX' indicates the system serial number)
- For VSP 5000 series or VSP G1x00, F1500 storage systems, enter: https://IP-address-or-host-name-of-the-SVP/sanproject/emergency.do
- For
VSP G200 storage systems, enter:
https://IP-address-or-host-name-of-the-SVP/dev/storage/8320004XXXXX/emergency.do (where the model number is '8320004' and '4XXXXX' indicates the system serial number)
- For VSP G/F400, G/F600 or VSP N400, N600 storage systems, enter: https://IP-address-or-host-name-of-the-SVP/dev/storage/8340004XXXXX/emergency.do (where the model number is '8340004' and '4XXXXX' indicates the system serial number)
- For VSP G/F800, VSP N800 storage systems, enter: https://IP-address-or-host-name-of-the-SVP/dev/storage/8360004XXXXX/emergency.do (where the model number is '8360004' and '4XXXXX' indicates the system serial number)
- For VSP G/F350 storage systems, enter https://IP-address-or-host-name-of-the-SVP/dev/storage/8820004XXXXX/emergency.do (where the model number is '882000' and '4XXXXX' indicates the system serial number).
- For VSP G/F370, G/F700, G/F900 storage systems, enter https://IP-address-or-host-name-of-the-SVP/dev/storage/8860004XXXXX/emergency.do (where the model number is '886000' and '4XXXXX' indicates the system serial number).
-
The following actions might be required to open the login dialog box, depending on your environment:
- If a message indicates that the enhanced security configuration is enabled on the computer, select
In the future, do not show this message and click
OK.
- If the SVP is set to support SSL-encrypted communication and security messages appear, make sure the certificate is correct and follow the instructions in the dialog box.
- If a message indicates that certain web sites are blocked, make sure you have added the SVP to the trusted sites zone.
-
Enter the user ID and password for the account.
-
Click
Log In.
-
If the Security Information dialog box appears, click
Yes.
-
If an Adobe Flash Player local storage area pop-up dialog box appears, click
Allow to open the
Device Manager - Storage Navigator main window. The cache function of Flash Player optimizes the process of
Device Manager - Storage Navigator. Denying the request might reduce processing speed.
You are successfully logged in to
Device Manager - Storage Navigator.
Note: If the login
process fails three times by using the same user ID, Device Manager - Storage Navigator stops responding for one minute. This is for security purposes
and is not a system failure. Wait, and then try again.