End of Migration Procedures

Virtual SMU Installation and Upgrade Guide for Hitachi NAS Platform

Version
15.1.x
Audience
anonymous
Part Number
MK-92HNAS074-20

After the successful completion of migration

Start All Replications

  1. Open a browser session to the SMU GUI at the SMU IP Address.
  2. Start all File Replication Jobs:
    1. Navigate to Home > Data Protection > File Replication.
    2. In the Schedules section, click <details> for any of the INACTIVE file replication jobs.
    3. Click <restart> for any of the aborted file replication jobs.
    4. Change the schedule values back to the previous values.
  3. Start all Object Replication Jobs:
    1. Navigate to Home > Data Protection > File Replication.
    2. In the Schedules section, click <details> for any of the INACTIVE file replication jobs.
    3. Click <restart> for any of the aborted object replication jobs.
    4. Enable any jobs disabled during the procedure.

Perform End Of Procedure Checks

  1. Check that the clients have access to their data
  2. Check SMTP Server:
    1. Navigate to Home > Status & Monitoring > Email Alerts Setup
    2. If the SMTP Server IP/Name is still configured for the old SMU IP Address, change the IP/Name to point to the new SMU IP/Name
    3. Click <apply>.
    4. Click the Shortcut: <Configure Email Forwarding> (in the lower left of the screen)
    5. Verify the SMTP Server is still correct
    6. If changed; Click <apply>
  3. Verify Quorum Device:
    1. If the Quorum Device Status does not show: Configured, Navigate to Home > Server Settings > Cluster Configuration.
    2. Click <remove>.
    3. Click <add>.
    4. Select a new Quorum Device.
    5. Click <OK>.
  4. Check EVS location
    1. Navigate to Home > Server Settings > EVS Migration
    2. Check that the EVSs are assigned to the preferred nodes; if they are not on the preferred nodes, click the Set all to preferred link.
  5. Collect Diagnostics from the system
    1. Navigate to Home > Status & Monitoring > Download Diagnostics
    2. In the Managed Server section, select Include Only the Currently Managed Server.
    3. Leave the Storage, and FC Switches check boxes selected.
    4. In the SMU section, uncheck Include archived diagnostics.
    5. Click <download>.
    6. Save to a location on your computer.
  6. If an adminEVS is required on an aggregation, refer to the earlier notes and re-add the adminEVS.
    1. Navigate to Home > Network Configuration > IP Addresses.
    2. Click <add>.
    3. Select Admin-EVS-x – admin services in the dropdown.
    4. Select the Port:.
    5. Click <OK>.