Adding IP addresses

Network Administration Guide for Hitachi NAS Platform

Part Number

Note: It is not possible to add or modify an IP address for a NAS module. Use the maintenance utility to perform these functions.
  1. Navigate to Home > Network Configuration > IP Addresses > add. The Add IP Address page appears.
  2. Select a Virtual Server (EVS) to assign to the IP address.
  3. Select an aggregation or management interface:
    • agX identifies one of the file serving aggregation interfaces
    • eth-agX identifies one of the aggregate Linux interfaces
    • agX-vlanXXXX identifies one of the VLAN interfaces
    • eth0 or eth1 identifies a 10/100/1000 interface for an HNAS server
    Note: When assigning an IP address to a file-serving EVS, the Administrator must specify a link aggregation or VLAN interface.
  4. Enter the IP address and Subnet Mask for the selected interface.
  5. Verify the settings, and then click OK to apply the settings or cancel to decline.