Under normal circumstances, the power button is rarely used. However, the power button can be used to restore power to the system when the server is in a standby power state.
When power cables are connected to the PSUs, the server normally powers up immediately. If, after 10 seconds, the LEDs on the power supplies are lit, but the Power Status LED is not lit, press the PWR button to restore power to the system. Open a case with
Hitachi Vantara Support Connect to get the problem resolved.
Note: Do not use the power button during normal operation of the server. Pressing the power button immediately causes an improper shutdown of the system. The PSUs will continue to run.