Capturing information from the existing node

NAS Platform and Unified Storage Series 4000 Hardware Reference

Part Number

To start, capture and record information from the existing node.

  1. Use the table below to record the information of the node to be replaced. This table will help you later during the node replacement process, by providing all the needed information.
    Information of the node to be replaced
    Node Number
    Softwear Version
    ETH0 Node IP Address
    ETH0 Subnet Mask
    ETH1 IP Address (if applicable)
    WWN-Port 1
    WWN-Port 2
    WWN-Port 3
    WWN-Port 4
  2. How is the current node connected to the storage?
    Direct Connected SAN Connected
  3. Is the storage using Host Group Security?
    No Yes