Capturing information from the existing node

To start, capture and record information from the existing node.

1. Use the table below to record the information of the node to be replaced. This table will help you later during the node replacement process, by providing all the needed information.

   Information of the node to be replaced
   Node Number
   Softwear Version
   ETH0 Node IP Address
   ETH0 Subnet Mask
   ETH1 IP Address (if applicable)
   WWN-Port 1
   WWN-Port 2
   WWN-Port 3
   WWN-Port 4

2. How is the current node connected to the storage?

   Direct Connected

   SAN Connected

3. Is the storage using Host Group Security?

   No

   Yes