[PROV] Edit DRU Attribute

Audit Log User Guide for VSP 5000 Series

Version

90-09-2x

Audience

anonymous

Part Number

MK-98RD9010-14

ft:lastEdition

2023-10-31

Example

09xx,YYYY/MM/DD,HH:MM.SS.xxx, 00:00,RMI AP,uid=user-name,,
[PROV],Edit DRU Attribute,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,Attribute,RT,Result} =[{0x00:0x00:0x01,0x80,100,Normal end},
{0x00:0x00:0x02,0x82,Unlimited,Error(9605-8122)}, {0x00:0x00:0x03,0x81,200,Normal
end}, {0x00:0x00:0x03,0x81,xxxx,Normal end}], Num. of
LDEVs=XXX

Detailed Information

Item	Description
LDKC:CU:LDEV	The LDKC, CU, and LDEV numbers of the logical volume where the attribute is set
Attribute	The set attribute in hexadecimal. Each bit (0–7) of 1 byte corresponds to the setting item. 1 is assigned to each bit when the setting is enabled and 0 (zero) is assigned to each bit when the setting is disabled. Each bit represents the following attributes: Bit 0: Mounting of LEDV (fixed to 1) Bit 1: Setting of S-VOL Disable Bit 2: Setting of Zero Read Cap mode Bit 3: Setting of Invisible mode Bit 4: Setting of reserve Bit 5: Fixed to 0 (zero)* Bit 6: Setting of Read Only attribute* Bit 7: Setting of Protect attribute* When 0x88 is output to the attribute, for example, Read/Write attribute is set to the logical volume to show that the reserve setting has been enabled. A hyphen (-) is output when a setting is not changed.
RT	The number of days set in Retention Term. A hyphen (-) is output when setting is not changed.
Result	The result of operation Normal end: Normal end, Error(`xxxx`-`yyyyy`): Abnormal end `where xxxx`: Part code, `yyyyy`: Error code
Num. of LDEVs	The number of logical volumes where the attribute has been set
*When bit 5, 6, and 7 are all 0 (zero), Read/Write has been set.