When splitting UR pairs in a consistency group, the audit log is registered only once for the direction of splitting the pair that uses the representative volume of the consistency group.
Example
09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,, [Config Command],,,Accept, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +Command=Pairsplit-S(RemoteCopy) ++Copy Kind=Remote ++P-VOL(Port-LUN-LDEV)=1A-2047-0x1A, S-VOL(Port-LUN-LDEV)=1B-3-0x3B,MCU S/N=12345,MCU SSID=0x6500, RCU S/N=22364,RCU SSID=0x3001, Virtual Storage Machine S/N=23456,,Delete Range=LU, Force=Enable,Invisible=Enable,Type=P-VOL
Detailed Information
|
Item |
Description |
|---|---|
|
Command |
The command name |
|
Copy Kind |
The remote copy Remote is output as the fixed value. |
|
P-VOL(Port-LUN-LDEV)*1 |
The port number, the LU number, and the LDEV number of the primary volume The port number and the LU number show the expanded LU of Command Control Interface No value is output when the option "-R" is specified. The LU number is the absolute LUN*2 ofCommand Control Interface |
|
S-VOL(Port-LUN-LDEV)*1 |
The port number, the LU number, and the LDEV number of the secondary volume The port number and the LU number show the expanded LU of Command Control Interface The LU number is the absolute LUN*2 ofCommand Control Interface |
|
MCU S/N*1 |
The serial number of the local storage system No value is output when the option "-R" is specified. |
|
MCU SSID*1 |
The SSID to which a volume on the local storage system belongs |
|
RCU S/N*1 |
The serial number of the remote storage system |
|
RCU SSID*1 |
The SSID to which a volume on the remote storage system belongs |
|
Virtual Storage Machine S/N |
The serial number of the virtual storage machine No value is output when a virtual storage machine is not specified. |
|
Blank item |
Nothing is output due to unused. |
|
Delete Range |
The range for deleting pairs Group: Deletes pairs by the device group LU: deletes pairs by the LU |
|
Force |
Indicates whether the setting for deleting pairs forcibly is enabled Enable: Pairs are forcibly deleted. Disable: Pairs are not forcibly deleted. |
|
Invisible |
Indicates whether hosts can access the volume after pairs are deleted Enable: The virtual LDEV ID is deleted from the volume on the local storage system not to be accessed by hosts. Disable: The virtual LDEV ID is not deleted from the volume on the local storage system to be accessed by hosts. |
|
Type |
The type of volumes of pairs to be deleted P-VOL: Primary volume, S-VOL: Secondary volume |
|
*1 When a virtual storage machine is specified, the value of the virtual storage machine is output. *2 For more information about the absolute LUN, see Command Control Interface Installation and Configuration Guide |
|