Example
09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,,
[Config Command],,,Accept,from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,
Seq.=xxxxxxxxxx
+Command=Add Parity Group
++PG=1-1,Drive Location={0-0,0-1,0-2,0-3,0-4,0-5,0-6,0-7}
++PG=1-2,Drive Location={1-0,1-1,1-2,1-3,1-4,1-5,1-6,1-7}
++PG=1-3,Drive Location={2-0,2-1,2-2,2-3,2-4,2-5,2-6,2-7}
++PG=1-4,Drive Location={3-0,3-1,3-2,3-3,3-4,3-5,3-6,3-7}
++Num. of PGs=4
++RAID Level=7D+1P,CLPR=1,Encryption=Disable,Copy
Back=Disable,Accelerated Compression=Enable,
Emulation=OPEN-V,Password=Enable
Detailed Information
|
Item |
Description |
|---|---|
|
Command |
The command name |
|
PG |
The parity group number |
|
Drive Location |
The location of the drive |
|
PG |
The parity group number (2) This index is not output if the number of parity groups is less than 2. |
|
Drive Location |
The location of the drive (2) This index is not output if the number of parity groups is less than 2. |
|
PG |
The parity group number (3) This index is not output if the number of parity groups is less than 3. |
|
Drive Location |
The location of the drive (3) This index is not output if the number of parity groups is less than 3. |
|
PG |
The parity group number (4) This index is not output if the number of parity groups is less than 4. |
|
Drive Location |
The location of the drive (4) This index is not output if the number of parity groups is less than 4. |
|
Num. of PGs |
The number of parity groups |
|
RAID Level |
The RAID level |
|
CLPR |
The CLPR ID |
|
Encryption |
The status of encryption setting Enable: Enabled, Disable: Disabled |
|
Copy Back |
The setting status of the copy back mode Enable: Enabled, Disable: Disabled |
|
Accelerated Compression |
The setting status of capacity expansion Enable: Enabled, Disable: Disabled |
|
Emulation |
The emulation type |
|
Password |
Indicates whether the one-time password is specified Enable: The one-time password is specified. This index is not output if no one-time password is specified. |