Example 1: when the copy type is SIMF
09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,In-band MF,uid=user-name,,
[Config Command],,,Accept, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=EST PAIR ++P-VOL(LDEV)=0x03,S-VOL(LDEV)=0x02,MCU S/N=30176,MCU SSID=0xC804,
RCU S/N=30176,RCU SSID=0xC805,Copy Type=SIMF,Copy Msg=, S-VOL Write=Enable,Online
Chk=Disable,Force=, Initial Copy=None(Suspend),NoDelay=Disable,Copy
Pace=Normal
Example 2: when the copy type is TCMF
09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,In-band MF,uid=user-name,,
[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +Command=EST PAIR
++P-VOL(LDEV)=0x02,S-VOL(LDEV)=0x02,MCU S/N=30176,MCU SSID=0xC804, RCU S/N=30179,RCU
SSID=0xC805,Copy Type=TCMF,Copy Msg=Disable, Fence Level=Never,Online
Chk=Disable,,Force=Disable, Initial Copy=Diff,S-VOL Wr(PSUE)=Enable,NoDelay=Disable,
Copy Pace=High
Detailed Information
|
Item |
Description |
|---|---|
|
Output items common to Example 1 and Example 2 |
|
|
Command |
The command name |
|
P-VOL(LDEV) |
The LDEV number of the primary volume |
|
S-VOL(LDEV) |
The LDEV number of the secondary volume |
|
MCU S/N |
The serial number of the local storage system |
|
MCU SSID |
The SSID to which a volume on the local storage system belongs The SSID to which the primary volume belongs for operating ShadowImage for Mainframe pairs |
|
RCU S/N |
The serial number of the remote storage system The same value as MCU S/N is output for operating ShadowImage for Mainframe pairs |
|
RCU SSID |
The SSID to which a volume on the remote storage system belongs The SSID to which the secondary volume belongs for operating ShadowImage for Mainframe pairs |
|
Copy Type |
The program product name SIMF: ShadowImage for Mainframe, TCMF: TrueCopy for Mainframe |
|
Output items when Copy Type is SIMF |
|
|
Copy Msg |
The setting status of the message request Enable: Enabled, Disable: Disabled No value is output when Initial Copy is None(Suspend). |
|
S-VOL Write |
Indicates whether the writing to the secondary volume after the suspend is enabled Enable: Enabled, Disable: Disabled No value is output when Initial Copy is not None(Suspend). |
|
Online Chk |
The setting status of the online check Enable: Enabled, Disable: Disabled |
|
Force |
The setting status of the pair forcible recovery when the pair status is suspending Enable: Enabled, Disable: Disabled No value is output when Initial Copy is not Diff. |
|
Initial Copy |
The type of the pair creation operation None(Suspend): Creates pairs and suspends them without copying data from the primary volume to the secondary volume. Entire: Creates pairs and copies data from the primary volume to the secondary volume. Diff: Copies the difference between the primary volume and the secondary volume |
|
NoDelay |
The setting status of NoDelay Enable: Enabled, Disable: Disabled |
|
Copy Pace |
The copy speed Slow: Low, Normal: Normal |
|
Output items when Copy Type is TCMF |
|
|
Copy Msg |
The setting status of the message request Enable: Enabled, Disable: Disabled No value is output when Initial Copy is None. |
|
Fence Level |
The fence level to be set (conditions where the local storage system rejects write operations to the primary volume) Never: Can write to the primary volume even if the pair is split. Status: Cannot write to the primary volume only when the storage system of the primary site cannot change the pair status of the secondary volume to PSUE |
|
Online Chk |
The setting status of the online check Enable: Enabled, Disable: Disabled |
|
Blank item |
Nothing is output due to unused. |
|
Force |
The setting status of the pair forcible recovery when the pair is in suspending status Enable: Enabled, Disable: Disabled No value is output when Initial Copy is Diff. |
|
Initial Copy |
The type of the pair creation operation None: Creates pairs but does not copy data from the primary volume to the secondary volume Entire: Creates pairs and copies data from the primary volume to the secondary volume. Diff: Copies the difference between the primary volume and the secondary volume None(Suspend): Creates pairs and suspends them without copying data from the primary volume to the secondary volume. |
|
S-VOL Wr(PSUE) |
Indicates whether the writing to the secondary volume is enabled at the pair suspended error Enable: Enabled, Disable: Disabled |
|
NoDelay |
The setting status of NoDelay Enable: Enabled, Disable: Disabled |
|
Copy Pace |
The copy speed High: High speed Low: Low speed Default: Normal speed |