The VSP E590 and VSP E790 run on single-phase AC power. The AC power input power for the storage systems is duplexed across the PDUs, enabling the equipment installed in the rack to remain powered on if power is removed from one of the two power distribution panels.
The following tables provide the electrical specifications for the VSP E590 and VSP E790 storage systems, including input power and input voltage and frequency requirements.
| Item | Component | Specification |
|---|---|---|
| Rated power | Controller | 1,960 V |
| Input power1 | Controller | Single-phase AC 50 Hz/60 Hz 200 V to 240 V |
| Input current1,2 | Controller |
9.8 A |
| Steady current3 | Controller |
4.9 A |
| Leakage current | Controller | 1.75 mA |
| Inrush current | Controller |
1st (0-p): 30 A 2nd (0-p): 20 A 1st (0-p) time: 25 ms |
| Power cord plug type | Controller | IEC60320 C14 |
Notes:
|
||
| Frequency | Input Voltage (AC) | Conditions | Tolerance (%) |
|---|---|---|---|
| 60 Hz ±2 Hz | 200 V to 240 V | 1 phase 2 wire + ground |
+10% or -11% |
| 50 Hz ±3 Hz | 200 V to 240 V | 1 phase 2 wire + ground |
+10% or -11% |