The outer rail extension of the SVP attaches directly to the rack so the inner rail extension can be slid into place to secure the SVP to the rack.
Confirm that the inner rail extension is installed.
-
Using the directions on the
rail, orient the outer rail extension so the front of the rail faces the front
of the rack.
-
Adjust the short rail and long rail to the proper distance so that they fit
snugly into the rack.
-
Insert two screws into the threaded holes in the slide area on the rail to
prevent the rail from moving.
-
Secure the long outer rail to
the vertical rail at the front of the rack using a washer and a screw on one
side of the rail and a safety nut on the other side.
-
Connect the short outer rail to the vertical rail at the rear of the rack using
another washer and screw.
- Repeat step 3 through step 5 on both sides of the rack.