Uploading firmware

Unified Compute Platform (UCP) Advisor Administration Guide

Version
4.6.x
Audience
anonymous
Part Number
MK-92UCP119-15
ft:lastEdition
2024-09-24

Firmware bundles must be uploaded to UCP Advisor before you can upgrade the firmware on your devices. The firmware bundle list retains only one firmware bundle at a time for each device type.

Delete the previous firmware bundle from UCP Advisor before you upload the new firmware bundle. See Deleting firmware bundles.
There are three firmware bundles that you can upload to UCP Advisor:
  • DS_compute07102024.zip: Contains firmware for the DS120/DS220/DS225/DS240 and DS120 / DS220 G2 server models.
  • HA_compute07102024.zip: Contains firmware for the HA800 series server models.
  • Switch07102024.zip: Contains firmware for the Ethernet and Fibre Channel switches.

When you upload a firmware bundle to a UCP system with a local gateway, it is also copied to all the remote gateways to keep them synchronized. The firmware bundle is stored in the /var/ucpadvisor/firmware/bundle folder of each remote gateway to reduce the firmware upgrade time of the devices on the remote gateway.

Uploading the firmware bundle takes about fifteen minutes. Synchronization with the remote gateways occurs simultaneously in batches of three, which also takes fifteen minutes per batch. If you add a new remote gateway while the synchronization is still in progress or after it has completed, the firmware bundle will be synchronized the next time you upgrade the firmware.

The Upgrade Firmware option will be disabled if there are no firmware bundles uploaded to UCP Advisor.

  • Download the respective firmware bundles for your version of the UCP Advisor software from the Hitachi Support Connect portal. A Hitachi login credential is required.
  • To upgrade server I/O card firmware, you must have the server BMC and ESXi details onboarded in the UCP Advisor inventory and you must have the ESXi host added to the vCenter inventory.
Note: The network bundle does not contain Brocade G620 firmware. See Uploading firmware for Brocade Fibre Channel G620 and G720 switches to manually upload it.
  1. Browse to a UCP system where you want to upload a device firmware bundle, and then click Firmware.
  2. Click Upload Firmware.
  3. Select the firmware bundle ZIP file that you downloaded as a prerequisite to this procedure, and then click Upload.
    The firmware bundle will upload to UCP Advisor, and then appear in the firmware bundle list.

    For detailed information about the devices and I/O card firmware versions included in a bundle, from the Actions menu for the firmware bundle, click View Details.


    Image displaying device firmware version information for DS series servers.


    Image displaying device firmware version information for HA800 series servers.


    Image displaying device firmware version information for Ethernet and Fibre Channel switches.

    For the latest supported versions of the I/O card firmware, see Supported I/O cards: DS120/DS220/DS225/DS240 and DS120/DS220 G2 server models.