Editing SNMP settings

You can edit the BMC settings for SNMP on individual servers, or on multiple servers simultaneously. You can also disable SNMP for all selected servers.

1. Browse to the UCP system where you want to edit the SNMP settings for one or more servers, and then click Compute.
2. Select the servers, and then click the Edit BMC Settings icon.
3. From the Select BMC setting to change list, select SNMP settings.
   The Selected Servers table lists the current SNMP settings for each server.
   

   

   
   
4. Edit the SNMP settings, as needed, or you can click Disable SNMP to disable SNMP on the selected servers.

   Read-only community string

   The read-only community string for the SNMP settings. If you enter this string, you must also enter a read-write community string.

   Read-write community string

   The read-write community string for the SNMP settings. If you enter this string, you must also enter a read-only community string.

   Note: HA810 /HA820 G2 and HA805/ HA810/HA815/HA820/HA825/HA840 G3 server models do not support Read-write community string.

   SNMP community string

   The community string for the SNMP settings. If you enter this string, you must also enter at least one SNMP destination address.

   SNMP destination address 1, 2, and 3

   The IP addresses for the SNMP traps. If you enter a destination address, you must also enter an SNMP community string.

5. Click Submit.