Adding a storage system

You can manually add a storage system to a UCP system.

1. Browse to the UCP system where you want to add a storage system.
2. Select Storage > Add Storage Device.
3. Enter the following:

   Management Address

   Enter the SVP address for the storage system. If you are adding an SVP-less storage system (VSP G/F350, G/F370, G/F700, G/F900), enter the controller 1 or 2 address.

   Serial

   Enter the serial number for the storage system.

   Username

   Enter the username identifying the user adding the storage system. The user must belong to a user group that has administrator privileges to create user accounts.

   Password

   Enter the password for the user adding the storage system. The password can have alphanumeric characters and the following symbols: hyphen (-), period (.), at mark (@), underscore (_), backslash (\), and comma (,).

4. Click Submit.