| Offsets |
Field name |
Length |
Format |
Description |
|
|---|---|---|---|---|---|
| 0 |
0 |
RRS2CU |
1 |
binary |
CU number. |
| 1 |
1 |
RRS2CCA |
1 |
binary |
LDEV number. |
| 2 |
2 |
RRS2SSID |
2 |
binary |
Storage subsystem ID (SSID). |
| 4 |
4 |
RRS2DEVN |
4 |
EBCDIC |
Device number. For volumes that have not been scanned, space characters are set. |
| 8 |
8 |
RRS2VSN |
6 |
EBCDIC |
Volume serial number. For volumes that have not been scanned or were not in the online state during scanning, space characters are set. |
| 14 |
E |
-- |
2 |
-- |
Reserved. |
| 16 |
10 |
RRS2STOR |
8 |
EBCDIC |
SMS storage group name. For volumes that have not been scanned or for which information about the SMS storage group could not be obtained during scanning, space characters are set. |
| 24 |
18 |
RRS2CYL |
4 |
binary |
Volume capacity (cylinders). For volumes that have not been scanned, 0 is set. |
| 28 |
1C |
-- |
1 |
-- |
Reserved. |
| 29 |
1D |
RRS2SCS |
1 |
binary |
Subchannel set ID. |
| 30 |
1E |
RRS2DVN |
2 |
binary |
Device number. The binary value converted from RRS2DEVN. |
| 32 |
20 |
RRS2TYPE |
1 |
binary |
LDEV type. |
| 33 |
21 |
RRS2CLID |
1 |
binary |
ID of the CLPR assigned to the volume. |
| 34 |
22 |
RRS2MPID |
1 |
binary |
ID of the MP unit that has the owner rights of the volume. |
| 35 |
23 |
RRS2PLID |
1 |
binary |
Pool ID. This field is valid when the value of bit 1 or bit 2 of RRS2TYPE is 1. |
| 36 |
24 |
RRS2PGRP |
2 |
binary |
Parity group number of the volume. |
| 38 |
26 |
RRS2PSUB |
2 |
binary |
Parity group sub-number of the volume. |
| 40 |
28 |
RRS2EMUT |
2 |
binary |
Emulation type of the volume.
|
| 42 |
2A |
-- |
2 |
-- |
Reserved. |
| 44 |
2C |
RRS2DTOD |
4 |
binary |
Time when the record information was obtained (in total number of seconds since Jan 1, 1970). |
| 48 |
30 |
RRS2BR |
4 |
binary |
Number of random read I/O operations.#2 |
| 52 |
34 |
RRS2BRH |
4 |
binary |
Number of cache hits of random read I/O operations.#2 |
| 56 |
38 |
RRS2BW |
4 |
binary |
Number of random write I/O operations.#2 |
| 60 |
3C |
RRS2BWH |
4 |
binary |
Number of cache hits of random write I/O operations.#2 |
| 64 |
40 |
RRS2SR |
4 |
binary |
Number of sequential read I/O operations.#2 |
| 68 |
44 |
RRS2SRH |
4 |
binary |
Number of cache hits of sequential read I/O operations.#2 |
| 72 |
48 |
RRS2SW |
4 |
binary |
Number of sequential write I/O operations.#2 |
| 76 |
4C |
RRS2SWH |
4 |
binary |
Number of cache hits of sequential write I/O operations.#2 |
| 80 |
50 |
RRS2CFR |
4 |
binary |
Number of CFW (Cache Fast Write) read I/O operations.#2 |
| 84 |
54 |
RRS2CFRH |
4 |
binary |
Number of cache hits of CFW (Cache Fast Write) read I/O operations.#2 |
| 88 |
58 |
RRS2CFW |
4 |
binary |
Number of CFW (Cache Fast Write) write I/O operations.#2 |
| 92 |
5C |
RRS2CFWH |
4 |
binary |
Number of cache hits of CFW (Cache Fast Write) write I/O operations.#2 |
| 96 |
60 |
RRS2STRK |
4 |
binary |
Number of tracks loaded from the drive to the cache by sequential access.#2 |
| 100 |
64 |
RRS2OTRK |
4 |
binary |
Number of tracks loaded from the drive to the cache by methods other than sequential access.#2 |
| 104 |
68 |
RRS2CTRK |
4 |
binary |
Number of tracks destaged from the cache to the drive.#2 |
| 108 |
6C |
RRS2RTRD |
4 |
binary |
Integrated value (in units of 16 milliseconds) of the response time for read I/O operations.#2 |
| 112 |
70 |
RRS2RTWR |
4 |
binary |
Integrated value (in units of 16 milliseconds) of the response time for write I/O operations.#2 |
| 116 |
74 |
-- |
4 |
-- |
Reserved. |
- #1
- If the LDEV section emulation type is 3390-V, only the field for configuration information is valid. The field for performance information is invalid.
- #2
- Value derived by calculating the difference between the value of this field and the value of the corresponding field of the directly preceding SMF record for which both the record type and the record subtype are the same. Dividing this value by the value of the SMFRSETM field (the time elapsed since the previous interval) of the product section gives the average for one hundredth of a second. If a record was not output at the preceding interval, a record will also not be output at the next interval.