If the parted command is used to create partitions on an HDLM device, after issuing the parted command, execute the following command:
# blockdev --rereadpt HDLM device SCSI device 1 ... SCSI device n
- Where:
HDLM device: The HDLM device name on which the partition was created (for example, /dev/sddlmad)
SCSI device 1..n: The SCSI device names which are being managed by the above HDLM device (for example, /dev/sda)
The following messages are displayed when the parted -l command is executed. However, you can ignore these messages, because there is no actual problem.
Error: /dev/sddlmfdrv0: unrecognised disk label
Warning: Error fsyncing/closing /dev/sddlmfdrv0: No such device or address
Retry/Ignore?