KAPL09001 to KAPL10000

Message ID	Message Text	Explanation
KAPL09001-E	There is no system management permission. Login with root permission and re-install HDLM.	Details The current user does not have the necessary administrator permission to install HDLM. Action Login with root permission and re-install HDLM.
KAPL09003-E	Cannot install in this system. Install HDLM on a supported OS.	Details HDLM cannot be installed on this system. Action See HDLMがサポートするホストとOS=GUID-5110F560-D34D-4CB0-B566-286BD3DAE733=5=EN=.html and install HDLM in a supported OS system.
KAPL09005-E	Could not stop the HDLM manager. Stop it manually, and then try the installation program or the remove program again.	Details An attempt to stop the HDLM manager service failed. Action Stop the HDLM manager manually, and then re-execute the installation program or the remove program.
KAPL09011-E	Cannot find a license key file /etc/opt/DynamicLinkManager/dlm.lic_key.	Details The license key file, `/etc/opt/DynamicLinkManager/dlm.lic_key`, cannot be found in the specified directory. Action Create a license key file, and re-execute the installation program.
KAPL09013-E	Some HDLM drivers could not be removed.	Details Deleting several HDLM drivers failed because these HDLM drivers were being used for HDLM upgrade installation, re-installation, or remove. Action Check whether an HDLM device is mounted. If an HDLM device has been mounted, unmount the device, and then remove the HDLM drivers again. For details on the `dlmcfgmgr` utility, see DLMCFGMGR_UTILITY_FOR_MANAGING_THE_HDLM_CONFIGURATION=GUID-206DE304-3FED-4BCC-AD77-A75B4DC0E01D=2=EN=.html.
KAPL09023-E	A file or directory related to HDLM could not be found. Re-install HDLM.	Details A target file to copy to the directory of Hitachi Command Suite products other than HDLM could not be found among the files related to HDLM. Action Re-install HDLM.
KAPL09024-E	An attempt to copy a file or directory related to HDLM has failed. Refer to the Messages section of the HDLM User's Guide for instructions to correct this problem.	Details An attempt to copy a file related to HDLM to the directory of Hitachi Command Suite products other than HDLM has failed. Action Re-execute the HDLM installation program.
KAPL09035-E	The HDLM driver could not be loaded. Execute the dlmstart utility. For details on the dlmstart utility, refer to the HDLM User's Guide section "dlmstart (Utility for Starting HDLM)".	Details The HDLM driver could not be loaded. Action Execute the `dlmstart` utility. For details on the `dlmstart` utility, refer to DLMSTART_UTILITY_FOR_STARTING_HDLM=GUID-2E6FA911-E868-4B28-9B6F-5A1A23906AF4=2=EN=.html.
KAPL09036-E	The HDLM manager could not be started. Execute the `aa...aa` command with the start parameter to start the HDLM manager.	Details The HDLM manager could not be started. In other than Red Hat Enterprise Linux 7, Red Hat Enterprise Linux 8, Red Hat Enterprise Linux 9, SUSE LINUX Enterprise Server 12 or SUSE LINUX Enterprise Server 15: `aa...aa`: `/etc/init.d/DLMManager` In Red Hat Enterprise Linux 7, Red Hat Enterprise Linux 8, Red Hat Enterprise Linux 9, SUSE LINUX Enterprise Server 12 or SUSE LINUX Enterprise Server 15: `aa...aa`: `/opt/DynamicLinkManager/bin/dlmmanager` Action In other than Red Hat Enterprise Linux 7, Red Hat Enterprise Linux 8, Red Hat Enterprise Linux 9, SUSE LINUX Enterprise Server 12 or SUSE LINUX Enterprise Server 15: Execute the `/etc/init.d/DLMManager` command with the start parameter to start the HDLM manager. In Red Hat Enterprise Linux 7, Red Hat Enterprise Linux 8, Red Hat Enterprise Linux 9, SUSE LINUX Enterprise Server 12 or SUSE LINUX Enterprise Server 15: Execute the `/opt/DynamicLinkManager/bin/dlmmanager` command with the start parameter to start the HDLM manager.
KAPL09037-E	The status of the HDLM manager could not be checked. If the HDLM manager does not start, execute the `aa...aa` command with the start parameter to start the HDLM manager.	Details An attempt to acquire the status of the HDLM manager has failed. In other than Red Hat Enterprise Linux 7, Red Hat Enterprise Linux 8, Red Hat Enterprise Linux 9, SUSE LINUX Enterprise Server 12 or SUSE LINUX Enterprise Server 15: `aa...aa`: `/etc/init.d/DLMManager` In Red Hat Enterprise Linux 7, Red Hat Enterprise Linux 8, Red Hat Enterprise Linux 9, SUSE LINUX Enterprise Server 12 or SUSE LINUX Enterprise Server 15: `aa...aa`: `/opt/DynamicLinkManager/bin/dlmmanager` Action In other than Red Hat Enterprise Linux 7, Red Hat Enterprise Linux 8, Red Hat Enterprise Linux 9, SUSE LINUX Enterprise Server 12 or SUSE LINUX Enterprise Server 15: If the HDLM manager does not start, execute the `/etc/init.d/DLMManager` command with the start parameter to start the HDLM manager. In other than Red Hat Enterprise Linux 7, Red Hat Enterprise Linux 8, Red Hat Enterprise Linux 9, SUSE LINUX Enterprise Server 12 or SUSE LINUX Enterprise Server 15: If the HDLM manager does not start, execute the `/opt/DynamicLinkManager/bin/dlmmanager` command with the start parameter to start the HDLM manager.
KAPL09038-E	The HDLM configuration could not be deleted.	Details Deleting the HDLM configuration failed because a managed HDLM device was being used. Action Stop applications that are using the managed HDLM device, unmount the managed HDLM device, and then retry remove.
KAPL09039-E	The HDLM devices could not be configured. Execute the HDLM-configuration definition utility (dlmcfgmgr) with the -r parameter specified. For details on the dlmcfgmgr utility, refer to the HDLM User's Guide section "dlmcfgmgr (HDLM-Configuration Definition Utility)".	Details The HDLM devices could not be configured. Action Execute the HDLM-configuration definition utility (`dlmcfgmgr`) with the `-r` parameter specified. For details on the `dlmcfgmgr` utility, see DLMCFGMGR_UTILITY_FOR_MANAGING_THE_HDLM_CONFIGURATION=GUID-206DE304-3FED-4BCC-AD77-A75B4DC0E01D=2=EN=.html.
KAPL09040-E	The file could not be edited. File name = `aa...aa`	Details An attempt to edit a file has failed. `aa...aa`: File name Action Make sure you can edit the file `aa...aa`.
KAPL09043-I	The installation of `aa...aa` completed successfully.	Details HDLM was installed. `aa...aa`: Name of installed file Action None.
KAPL09044-I	The remove of `aa...aa` completed successfully.	Details HDLM was removed. `aa...aa`: Name of removed file. Action None.
KAPL09045-E	An attempt to create a file or directory related to HDLM has failed. Make sure that sufficient disk space exists, and then re-install HDLM.	Details Installation could not be executed because an attempt to create an HDLM-related file or directory failed. Action Make sure that sufficient disk capacity exists, and then re-install HDLM.
KAPL09046-E	The RPM file is not in the correct path. Confirm that the installation medium is correct, and then re-install HDLM.	Details Installation could not be executed because there was no RPM file in a suitable path. Action Confirm that the installation medium is correct, and then re-install HDLM.
KAPL09047-E	Downgrading from `aa...aa` to `bb...bb` is not supported.	Details Downgrade installation is not supported. `aa...aa`: The version of HDLM. `bb...bb`: The version of HDLM. Action Remove HDLM, and then re-execute the installation program.
KAPL09049-W	An attempt to delete a file or directory related to HDLM has failed. Name = `aa...aa`	Details An attempt to delete an HDLM-related file or directory has failed. `aa...aa`: File name or a directory name Action Delete the file or directory shown in `aa...aa`.
KAPL09050-E	The driver module dependencies could not be updated. Contact your HDLM vendor or the maintenance company if there is a maintenance contract of HDLM.	Details Installation or remove failed because the dependency information for a driver module could not be updated. Action Contact your HDLM vendor or the maintenance company if there is a maintenance contact of HDLM.
KAPL09051-E	You do not have permission to execute the file. File name = `aa...aa`	Details Installation or remove failed because there was no execution permission for a file. `aa...aa`: File name Action Make sure you can execute the file shown in `aa...aa`.
KAPL09076-I	The permanent license was installed.	Details The permanent license was installed. Action None.
KAPL09077-I	The temporary license was installed. The license expires on `aa...aa`.	Details A temporary license was installed. `aa...aa`: Year (4 digits)/month (01-12)/day (01-31) Action Install a permanent license by the expiration day.
KAPL09078-I	The emergency license was installed. The license expires on `aa...aa`.	Details An emergency license was installed. `aa...aa`: Year (4 digits)/month (01-12)/day (01-31) Action Install a permanent license by the expiration day.
KAPL09079-I	The permanent license has been installed.	Action None.
KAPL09080-I	The temporary license has been installed. The license expires on `aa...aa`.	Details The temporary license has been installed. `aa...aa`: Year (4 digits)/month (01-12)/day (01-31) Action Install a permanent license by the expiration day.
KAPL09081-I	The emergency license has been installed. The license expires on `aa...aa`.	Details The emergency license has been installed. `aa...aa`: Year (4 digits)/month (01-12)/day (01-31) Action Install a permanent license by the expiration day.
KAPL09082-W	The temporary license expired.	Action Enter a permanent license key.
KAPL09083-W	The emergency license expired.	Action Install a permanent license.
KAPL09087-E	The entered license key is invalid. Renewal of the license key will now stop. Obtain a valid license key, and then re-install HDLM.	Details License renewal will now stop because an invalid license key was entered. Action Obtain a valid license key, and then re-install HDLM.
KAPL09088-E	The entered license key is invalid. The HDLM installation will now terminate. Obtain a valid license key, and then re-install HDLM.	Action Obtain a valid license key, and then re-install HDLM.
KAPL09090-W	This operation will now be continued without updating the license.	Details This operation will continue without updating the license. Action Install a permanent license at a later time.
KAPL09091-E	A fatal error occurred in HDLM. The system environment is invalid. Contact your HDLM vendor or the maintenance company if there is a maintenance contract of HDLM.	Details A part of the HDLM configuration file is missing. Action Contact your HDLM vendor or the maintenance company if there is a maintenance contract of HDLM.
KAPL09092-I	The installation was stopped because a stop request was received.	Details The installation was aborted, because a stop request was received. Action Installation was terminated before all processing could be completed. If the HDLM RPM has been installed, then use the rpm command to perform remove.
KAPL09093-I	`aa...aa` will be installed. Is this OK? [y/n]:	Details The message checks whether you want to install `aa...aa`. `aa...aa`: The version of HDLM to be installed, or the version of the HDLM SP to be installed Action Please enter "`y`" to install, and "`n`" to abort the installation.
KAPL09094-W	The entered value is invalid. Re-enter [y/n]:	Details The message checks whether you want to correct an invalid value. Action Please enter "`y`" or "`n`".
KAPL09095-E	The entered value is invalid. The installation has been stopped.	Details The entered value is invalid. The installation has been stopped. Action To install HDLM, please re-execute the HDLM installation program.
KAPL09096-I	The user stopped the installation.	Details Installation was aborted by the user. Action None.
KAPL09097-E	A package installable on this system was not found. Please check whether HDLM is supported for this system. For details about installing the package on a supported OS, refer to the HDLM User's Guide section "Hosts and OSs Supported by HDLM".	Details A suitable package for installation on this system could not be found. Action Please check whether HDLM is supported for this system. For details about installing the package on a supported OS, see HDLMがサポートするホストとOS=GUID-5110F560-D34D-4CB0-B566-286BD3DAE733=5=EN=.html.
KAPL09098-E	An attempt to install `aa...aa` has failed. Code = `bb...bb`	Details An attempt to install `aa...aa` has failed. `aa...aa`: Program name `bb...bb`: Code (decimal number). Action Please re-install HDLM after checking the error information and resolving the problems.
KAPL09106-E	An invalid parameter has been specified.	Details An invalid parameter has been specified for the `installhdlm` utility. Action Specify the correct options, and then re-execute the `installhdlm` utility.
KAPL09113-E	There is no installable license key in the license key file. File name = `aa...aa` Make sure that the license key file is correct, and then re-install HDLM.	Details There is no HDLM-installable license key in the license key file. `aa...aa`: `/var/tmp/hdlm_license` Action Make sure that the license key file is correct, and then re-install HDLM. /var/tmp/hdlm_license
KAPL09114-I	There is no license key file. File name = `aa...aa`	Details There is no license key file in the designated directory. `aa...aa`: `/var/tmp/hdlm_license` Action Save the correct license key file in the designated directory, and then re-execute installation. `/var/tmp/hdlm_license`
KAPL09115-W	An attempt to delete the license key file has failed. File name = `aa...aa`	Details An attempt to delete the license key file has failed. `aa...aa`: `/var/tmp/hdlm_license` Action If a license key file exists, delete it. `/var/tmp/hdlm_license`
KAPL09116-W	The command could not be installed. (command = `aa...aa`)	Details The output HDLM command cannot be used. `aa...aa`: Command name Action The output command can be executed by using a different name. If you want to use the output name, use the output command to overwrite or re-install.
KAPL09121-E	`aa...aa` is not present at `bb...bb`.	Details `aa...aa`: Installer name `bb...bb`: Installer path Action Install HDLM from the DVD-ROM. When you are attempting to install HDLM from the directory to which the DVD-ROM was copied, make sure that all the contents of the DVD-ROM have been copied to that directory, and then retry the installation.
KAPL09135-E	One of the following was executed at the same time as an HDLM command set -lic operation: another set -lic operation, or an update of the license for an update installation.	Action Check the license by using the HDLM command's `view -sys -lic` operation. If necessary, update the license by using the `set -lic` operation during or after the installation. If the same error message is output, contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. Do not perform the following operation: Execution of the HDLM command's set -lic operation simultaneously with an update of the license for an upgrade installation
KAPL09142-E	HDLM `aa...aa` cannot be performed. Wait a while, and then perform `aa...aa` again. Error Code =`bb...bb`	Details HDLM cannot be installed or removed. `aa...aa` : "installation" or "remove" `bb...bb` : Internal code (decimal (base-10) number) Action Wait a while, and then reperform the installation or remove.
KAPL09143-E	HDLM `aa...aa` cannot be performed. Error Code = `bb...bb`	Details HDLM cannot be installed or removed. `aa...aa`: "installation" or "remove" `bb...bb`: Internal code (decimal number) Action Contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM.
KAPL09146-E	A directory required by HDLM not found. Directory = `aa...aa`. Create the directory displayed in this message, then re-install HDLM.	Details `aa...aa`: Referenced directory name Action Check the directory displayed in the message. Re-install HDLM after creating the directory displayed in the message.
KAPL09147-E	An attempt to create a file related to HDLM has failed. File name = `aa...aa`. Remove unnecessary files and secure free space on the file system. Check the write permissions for the directory. Re-install HDLM.	Details `aa...aa`: File that an attempt was made to create Action Remove unnecessary files and secure unused capacity on the file system. Check the write permissions for the directory. Re-install HDLM.
KAPL09160-E	HDLM does not support this kernel. Install HDLM on a supported OS.	Details HDLM does not support the current kernel, or it does not support the combination of the current CPU and the kernel. Action Make sure the current kernel and the running server's CPU are of the correct type.
KAPL09163-E	An HDLM package installable on this kernel was not found in the mount point. Mount point = `aa...aa`. Check the HDLM installation media, or check the current kernel.	Details The HDLM for the current kernel has not been stored in the HDLM installation media being mounted in the mount point that is specified in the message. Alternatively, HDLM does not support the kernel you are using. `aa...aa`: mount point Red Hat Enterprise Linux: `/media/cdrom` Action Check the HDLM installation media, or check the current kernel.
KAPL09177-I	HDLM version: `aa...aa`	Details `aa...aa`: The version of HDLM to be installed. Action None.
KAPL09191-W	The installation information settings file does not exist.	Details The installation information settings file specified for the second parameter does not exist. Action Make sure that the path name of the installation-information settings file is appropriate, and then try again.
KAPL09199-E	HDLM does not support this operating system.	Details HDLM does not support the currently running OS. For details about the OSs supported by HDLM, see HDLMがサポートするホストとOS=GUID-5110F560-D34D-4CB0-B566-286BD3DAE733=5=EN=.html#GUID-5110F560-D34D-4CB0-B566-286BD3DAE733__HYO03001V067001, HDLMがサポートするホストとOS=GUID-5110F560-D34D-4CB0-B566-286BD3DAE733=5=EN=.html#GUID-5110F560-D34D-4CB0-B566-286BD3DAE733__HYO03001V086501,HDLMがサポートするホストとOS=GUID-5110F560-D34D-4CB0-B566-286BD3DAE733=5=EN=.html#GUID-5110F560-D34D-4CB0-B566-286BD3DAE733__HYO03001V088901, HDLMがサポートするホストとOS=GUID-5110F560-D34D-4CB0-B566-286BD3DAE733=5=EN=.html#GUID-5110F560-D34D-4CB0-B566-286BD3DAE733__HYO03001V063008, HDLMがサポートするホストとOS=GUID-5110F560-D34D-4CB0-B566-286BD3DAE733=5=EN=.html#GUID-5110F560-D34D-4CB0-B566-286BD3DAE733__HYO03001V0862, HDLMがサポートするホストとOS=GUID-5110F560-D34D-4CB0-B566-286BD3DAE733=5=EN=.html#GUID-5110F560-D34D-4CB0-B566-286BD3DAE733__HYO03001V071101, HDLMがサポートするホストとOS=GUID-5110F560-D34D-4CB0-B566-286BD3DAE733=5=EN=.html#GUID-5110F560-D34D-4CB0-B566-286BD3DAE733__HYO03001V076101, HDLMがサポートするホストとOS=GUID-5110F560-D34D-4CB0-B566-286BD3DAE733=5=EN=.html#GUID-5110F560-D34D-4CB0-B566-286BD3DAE733__HYO03001V087201, HDLMがサポートするホストとOS=GUID-5110F560-D34D-4CB0-B566-286BD3DAE733=5=EN=.html#GUID-5110F560-D34D-4CB0-B566-286BD3DAE733__HYO03001V087601 or HDLMがサポートするホストとOS=GUID-5110F560-D34D-4CB0-B566-286BD3DAE733=5=EN=.html#GUID-5110F560-D34D-4CB0-B566-286BD3DAE733__TABLE_RRL_M2C_DGC. Action Make sure that the currently running OS is supported.
KAPL09210-I	`aa...aa` will now start.	Details `aa...aa` has just started. `aa...aa`: `installhdlm`, `installhdlm_analysis`, `ENVIRONMENT_SETTINGS`, `driver_config_settings`, or `dlmcfgmgr` Action None.
KAPL09211-I	`aa...aa` completed successfully.	Details `aa...aa` completed successfully. `aa...aa`: `installhdlm`, `installhdlm_analysis`, `ENVIRONMENT_SETTINGS`, `driver_config_settings`, or `dlmcfgmgr` Action None.
KAPL09212-E	`aa...aa` ended abnormally.	Details `aa...aa` ended abnormally. `aa...aa`: `installhdlm`, or `installhdlm_analysis` Action Check the error message that was output just before this message, and then perform the action indicated in that error message.
KAPL09213-W	An error occurred during `aa...aa` processing.	Details Although the `aa...aa` processing has ended, an error occurred during the processing. `aa...aa`: `ENVIRONMENT_SETTINGS`, `driver_config_settings`, or `installhdlm` Action Review the contents of installation information settings file when KAPL01008-W or KAPL01009-W is outputted before this message. For details, see EDITING_AN_INSTALLATION-INFORMATION_SETTINGS_FILE=GUID-3249A083-390C-4618-98DB-0E0DF17CE6AE=1=EN=.html. When a message except for the above was outputted, perform the action indicated in that error message.
KAPL09215-E	The system environment is invalid. Error Code = `aa...aa`	Details The system environment is not valid as an environment for executing the `installhdlm` utility. `aa...aa`: Error number (decimal number) that specifies the executed processing Action If the error code is 4: The `/var/tmp` directory does not have enough unused capacity, or the user does not have write permission for it. Make sure there is enough unused capacity and that the user has write permission for this directory, and then try again. If the error code is 6: The `/etc/opt` directory does not have enough unused capacity, or the user does not have write permission for it. Make sure there is enough unused capacity and that the user has write permission for this directory, and then try again. other error code: Contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM.
KAPL09216-E	An error occurred during I/O of a file that installhdlm uses. Error Code = `aa...aa`,`bb...bb`	Details An error occurred during I/O of a file that `installhdlm` uses. `aa...aa`: Error number that indicates the executed processing (decimal (base-10) number) `bb...bb`: Return value of the executed processing (decimal (base-10) number) Action Make sure that sufficient unused capacity exists for the `/tmp` directory. If the capacity is insufficient, allocate the required amount of capacity, and then retry the operation. For details about the required unused capacity. For details about the required unused capacity, see DISK_REQUIREMENTS=GUID-1B8D3278-2D68-4493-96A2-B766B6409DF9=2=EN=.html.
KAPL09217-E	An error occurred during reading of the installation information settings file. Error Code = `aa...aa`,`bb...bb`	Details An error occurred while reading the installation information settings file. `aa...aa`: Error number (decimal number) that specifies the executed processing `bb...bb`: Return value (decimal number) of the executed processing Action If the error code is `9001`,`-1`: You do not have read permissions for the installation information settings file. Make sure that you have access permissions. If any other error code is output: Contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM.
KAPL09218-E	`aa...aa` cannot be executed.	Details A utility or command that `installhdlm` uses was not in the correct location, or you do not have a required permission. `aa...aa`: `installhdlm_analysis`, `dlmcfgmgr`, or `dlnkmgr` Action If `aa...aa` is `dlnkmgr` : The correct location of `dlnkmgr` is `/opt/DynamicLinkManager/bin`. If `dlnkmgr` was not in the correct location, or you did not have a required permission, re-execute `installhdlm`. If `aa...aa` is `installhdlm_analysis`: The correct location of `installhdlm_analysis` is `/DVD-ROM/HDLM_Linux/bin`. Make sure that the utility you want to execute is in the correct location and that you have the required permissions. If a utility is not in the correct location, copy the required files to the correct location, and then retry the operation. If you do not have a required permission, grant required permissions to yourself, and then retry the operation. If `aa...aa` is `dlmcfgmgr`: The correct location of dlmcfgmgr is `/sbin`. If `dlnkmgr` was not in the correct location, or you did not have a required permission, re-execute `installhdlm`.
KAPL09219-E	An internal error occurred in the installhdlm_analysis. Error Code = `aa...aa`,`bb...bb`	Details An internal error occurred in the `installhdlm_analysis`. `aa...aa`: Error number (decimal number) that specifies the executed processing `bb...bb`: Return value (decimal number) of the executed processing Action Contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM.
KAPL09220-W	The composition of the installation information settings file is invalid. Error Code = `aa...aa`,`bb...bb`	Details In the installation information settings file, the length of a single line exceeds 1,023 characters, or the first non-white space, non-comment line that appears is not `[INSTALLATION_SETTINGS]`. `aa...aa`: Error number (decimal number) that specifies the executed processing `bb...bb`: Return value (decimal number) of the executed processing Action Specify the revised installation information settings file, and then retry the operation.
KAPL09221-W	The definition of the installation information settings file includes an unusable character. Error Code = `aa...aa`,`bb...bb`, line = `cc...cc`	Details A character that cannot be used in a non-comment line was used. `aa...aa`: Error number (decimal number) that specifies the executed processing `bb...bb`: Return value (decimal number) of the executed processing `cc...cc`: Line number (decimal number) of an installation information settings file. Action Specify the revised installation information settings file, and then retry the operation.
KAPL09227-W	The definition of the installation information settings file includes an invalid key. Error Code = `aa...aa`,`bb...bb`, line = `cc...cc`	Details A key that does not exist is included. `aa...aa`: Error number (decimal number) that specifies the executed processing `bb...bb`: Return value (decimal number) of the executed processing `cc...cc`: Line number (decimal number) of an installation information settings file. Action Specify the revised installation information settings file and then retry the operation.
KAPL09228-W	The definition of the installation information settings file includes an invalid key value. Error Code = `aa...aa`,`bb...bb`, line = `cc...cc`	Details The format of a key value is invalid. `aa...aa`: Error number (decimal number) that specifies the executed processing `bb...bb`: Return value (decimal number) of the executed processing `cc...cc`: Line number (decimal number) of an installation information settings file. Action Specify the revised installation information settings file and then retry the operation.
KAPL09229-W	The definition of the installation information settings file includes an invalid section name. Error Code = `aa...aa`,`bb...bb`, line = `cc...cc`	Details A section that does not exist is included. `aa...aa`: Error number (decimal number) that specifies the executed processing `bb...bb`: Return value (decimal number) of the executed processing `cc...cc`: Line number (decimal number) of an installation information settings file. Action Specify the revised installation information settings file and then retry the operation.
KAPL09230-W	The definition of the installation information settings file includes a duplicated section name. Error Code = `aa...aa`,`bb...bb`, line = `cc...cc`	Details A duplicated section name is included. `aa...aa`: Error number (decimal number) that specifies the executed processing `bb...bb`: Return value (decimal number) of the executed processing `cc...cc`: Line number (decimal number) of an installation information settings file. Action Specify the revised installation information settings file and then retry the operation.
KAPL09231-W	The definition of the installation information settings file includes a duplicated key. Error Code = `aa...aa`,`bb...bb`, line = `cc...cc`	Details A duplicated key is included. `aa...aa`: Error number (decimal number) that specifies the executed processing `bb...bb`: Return value (decimal number) of the executed processing `cc...cc`: Line number (decimal number) of an installation information settings file. Action Specify the revised installation information settings file and then retry the operation.
KAPL09232-W	The composition of the definition of the installation information settings file is invalid. Error Code = `aa...aa`,`bb...bb`, line = `cc...cc`	Details A key, key value, or equal sign (`=`) is missing. `aa...aa`: Error number (decimal number) that specifies the executed processing `bb...bb`: Return value (decimal number) of the executed processing `cc...cc`: Line number (decimal number) of an installation information settings file. Action Specify the revised installation information settings file and then retry the operation.
KAPL09233-W	The definition of the installation information settings file is too long. Error Code = `aa...aa`,`bb...bb`, line = `cc...cc`	Details The length of a single line of the definition exceeds 1023 characters. `aa...aa`: Error number (decimal number) that specifies the executed processing `bb...bb`: Return value (decimal number) of the executed processing `cc...cc`: Line number (decimal number) of an installation information settings file. Action Specify the revised installation information settings file and then retry the operation.
KAPL09234-W	A folder or file specified by the installation information settings file does not exist. Name = `aa...aa`	Details A folder or file specified by the installation information settings file does not exist. `aa...aa`: Name of the folder or file that does not exist. Action Specify the revised installation information settings file and then retry the operation.
KAPL09238-W	The specified file is not a normal one. Fail name = `aa...aa`	Details A file other than a normal one (for example, a directory file or a special file.) is specified. `aa...aa`: Specified file name (character string) Action Specify the correct file, and then retry the operation.
KAPL09239-I	The system will now restart.	Details The host will restart because restart was specified in the installation information settings file. Action None.
KAPL09240-I	There is no license key file. File name = `aa...aa` If you want to update the HDLM license, create a license key file (referring to the HDLM installation instructions in the user's guide, if necessary), and then re-execute the installation program.	Details There is no license key file. `aa...aa`: `dlm.lic_key` Action None.
KAPL09244-E	Could not create file supporting driver update.	Details Could not create file supporting driver update. Action Re-execute the HDLM installation program. If it failed again Contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM.
KAPL09245-E	Could not delete file supporting driver update.	Details Could not delete file supporting driver update. Action Contact your HDLM vendor or the maintenance company if there is a maintenance contact of HDLM.
KAPL09267-W	The file does not exist. File name = `aa...aa`	Details `aa...aa`: `/etc/.DynamicLinkManager/Path00`, `/etc/.HBaseAgent/Path00` Action Reinstall HDLM.
KAPL09268-W	You do not have read permission for the file. File name = `aa...aa`	Details `aa...aa`: `/etc/.DynamicLinkManager/Path00`, `/etc/.HBaseAgent/Path00` Action Execute the `DLMgetras` utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the `DLMgetras` utility, see DLMGETRAS_UTILITY_FOR_COLLECTING_HDLM_ERROR_INFORMATION=GUID-23937FA5-2612-443B-A4FB-FCC9CA3E70AC=3=EN=.html.
KAPL09269-W	The file is invalid. File name = `aa...aa`	Details `aa...aa`: `/etc/.DynamicLinkManager/Path00`, `/etc/.HBaseAgent/Path00` Action Reinstall HDLM.
KAPL09270-E	The directory does not exist. Directory name = `aa...aa`	Details `aa...aa`: `/HDLM installation directory`, `/HBsA installation directory` Action Reinstall HDLM.
KAPL09295-W	Restart the host to complete installation.	Details HDLM was installed successfully. Restart the host to complete installation. Action The manual includes the same content. Restart the host to complete installation. Supplement: The -update option should only be used in an HDLM-SAN boot environment. However, if the option is used in a different environment, one of the following must be done: If you are using the option in an environment from which migration to an HDLM-SAN boot environment is not possible: Restart the host, and then start the operation. If you are using the option in an environment from which migration to an HDLM-SAN boot environment is possible: Restart the host, and then migrate to an HDLM-SAN boot environment by following the procedure in the manual.
KAPL09296-E	The upgrade of the device management files failed.	Details The upgrade of the device management files failed. Action To continue HDLM installation: Delete the device management files (/dev/dlm/sddlm[af]drv0), and then install HDLM. To terminate HDLM installation: Restart the host to reconfigure HDLM, and then start the application.
KAPL09297-W	Create an initial RAM disk image, and then update the boot loader configuration file. Then restart the host to complete installation.	Details HDLM was installed successfully. Create an initial RAM disk image, and then update the boot loader configuration file. Then restart the host to complete installation. Action Follow the procedure to create an initial RAM disk image. Specify the created initial RAM disk image in the boot loader configuration file, and then restart the host.
KAPL09299-W	The creation of the initial RAM disk image failed.	Details The creation of the initial RAM disk image failed. Action Follow the procedure to create an initial RAM disk image. Specify the created initial RAM disk image in the boot loader configuration file, and then restart the host.
KAPL09300-I	An initial RAM disk image was created. (file name = `aa...aa`)	Details An initial RAM disk image was created. `aa...aa`: Name of the created file (full path) Action None.
KAPL09301-W	Update the boot loader configuration file, and then restart the host to complete installation.	Details HDLM was installed successfully. Update the boot loader configuration file, and then restart the host to complete installation. Action Specify the created initial RAM disk image in the boot loader configuration file, and then restart the host.
KAPL09306-W	Create an initial RAM disk image. Then restart the host to complete installation.	Details HDLM was installed successfully. Create an initial RAM disk image. Then restart the host to complete installation. Action Follow the procedure to create an initial RAM disk image, and then restart the host.
KAPL09320-E	A command required to install HDLM could not be found. Command name = `aa...aa`	Details A command required to install HDLM could not be found. `aa...aa`: Command name Action Make sure that the OS you are using meets the prerequisite conditions, and install all required packages. Then, re-install HDLM. The required packages might not be correctly installed due to missing or insufficient prerequisite packages. After applying the prerequisite packages, reinstall the required packages. For details on the prerequisite packages, contact your OS vendor.
KAPL09321-E	The specified option is invalid.	Details An invalid option was specified. Action Revise the specified option in accordance with the following syntax, and then re-execute the utility. Usage: `removehdlm [ -h ]`
KAPL09323-W	The hbsasrv service could not start.	Details The hbsasrv service could not start because the removal of HDLM was not performed by using the `removehdlm` utility. Action HDLM was removed, but the hbsasrv service could not start. Manually start the hbsasrv service.
KAPL09501-E	HDLM is not installed on this system.	Details An SP cannot be applied because HDLM is not installed on the system. Action Check whether HDLM has been correctly installed.
KAPL09505-E	`aa...aa` cannot be applied to the installed `bb...bb`.	Details This HDLM or SP (`aa...aa`) cannot be used for an upgrade installation or re-installation on the already installed HDLM or installed SP (`bb...bb`). `aa...aa`: the version of HDLM or SP currently being installed `bb...bb`: the version of HDLM or SP already installed Action An upgrade installation or re-installation cannot be performed on an already installed HDLM or SP. When installing HDLM: First remove the installed HDLM or SP, and then perform a new installation. When installing a SP: Obtain, and then install an SP or corrected version that can be applied to the installed version of HDLM.
KAPL09509-E	Service Pack `aa...aa` cannot be installed. The same version has already been installed.	Details The version of the SP being installed is the same as the already installed SP. Installation of the SP has stopped. `aa...aa`: Version of the SP being installed Action You do not have to install the SP. Keep using HDLM as is.
KAPL09510-E	Service Pack `aa...aa` cannot be installed. A newer version has already been installed.	Details A newer version is already installed. Installation of SP (`aa...aa`) is stopped. `aa...aa`: Version of SP to be installed Action You do not have to install the SP. Keep using the already installed HDLM.
KAPL09511-E	The RPM file for the service pack was not found.(directory = `aa...aa`)	Details The RPM file for the SP corresponding to the installed HDLM does not exist in the directory indicated by the message. `aa...aa`: Directory name Action Download the installation file for the SP version again. Then, retry the installation.
KAPL09601-E	Cannot install in this system. Install HDLM on a supported OS.	Details HDLM cannot be installed on this system. Action Execute the following command in place of `installux.sh`: `DVD-mount-point/HDLM_Linux/installhdlm`
KAPL09602-E	The installation will now stop because a file or directory is missing. Confirm that the file or directory (`aa...aa`) exists.	Details `aa...aa`: Name of the missing file or directory Action If an installation is performed from the DVD-ROM, confirm that the DVD-ROM is not damaged. If an installation is performed by using files copied from the DVD-ROM, re-copy all of the DVD-ROM files.
KAPL09603-E	The installation will now stop because a command or utility cannot be executed. Confirm that the command or utility (`aa...aa`) exists, and that you have the proper permission.	Details `aa...aa`: Name of the command or utility that cannot be executed. Action When the output information is an HDLM utility: If an installation is performed from the DVD-ROM, confirm that the DVD-ROM is not damaged. If an installation is performed by using files copied from the DVD-ROM, re-copy all of the DVD-ROM files. After that, confirm the permission of the HDLM utility that caused the error. When the output information is an OS command: Confirm that the OS command exists, and that you have the proper permission.
KAPL09604-E	A system error occurred. The installation will now stop. (command = `aa...aa`, error code = `bb...bb`)	Details `aa...aa`: Command that failed `bb...bb`: Return value Action Acquire the log `/var/tmp/hdlm_installux_sh.log`, and then contact your HDLM vendor or, if you have a maintenance contract, contact the maintenance company.
KAPL09622-E	A script required to install HDLM could not be found. Script name = `aa...aa`	Details A script required to install HDLM could not be found. `aa...aa`: Script name Action Make sure that the OS you are using meets the prerequisite conditions, and then install the following package. Then, re-install HDLM. `initscripts-xx.xx.xx.rpm` (`xx.xx.xx`: Version) RPM package version depends on the OS version you are using.