KAPL08019-E
|
The path (aa...aa) detected an error (bb...bb). (cc...cc)
|
- Details
An error occurred in the path. The error is most likely due to a disconnected cable.
aa...aa: Path identifier (hexadecimal number)
bb...bb: Error code (hexadecimal number)
- If a temporary failure is detected when the OS is started in a SAN
environment, 0x00000001 is displayed.
cc...cc: 0x00000000 (fixed)
- Action
Check the path in which the error was detected.
For Red Hat Enterprise Linux 9 or Oracle Linux
9, if error code 0x00000001 is output during OS startup in a SAN boot
environment, ignore the error because HDLM will recover the path.
|
KAPL08022-E
|
A path error occurred. ErrorCode = aa...aa, PathID = bb...bb, PathName = cc...cc.dd...dd.ee...ee.ff...ff, DNum = gg...gg, HDevName = hh...hh
|
- Details
A physical or logical error occurred in the path.
aa...aa: OS error code (hexadecimal number)
bb...bb: Path ID (same as PathID of view -path) (decimal (base-10) number)
cc...cc: Host port number (same as PathName of view -path) (hexadecimal number)
dd...dd: Bus number (same as PathName of view -path) (hexadecimal number)
ee...ee: Target ID (same as PathName of view -path) (hexadecimal number)
ff...ff: HLU number (same as PathName of view -path) (hexadecimal number)
gg...gg: Dev number (same as DNum of view -path) (decimal (base-10) number)
hh...hh: Host device name (same as HDevName of view -path)
- Action
There could be an error in the path. See COM_NL_WHAT_TO_DO_FOR_A_PATH_ERROR=GUID-477D552A-B034-4CE0-AB4E-DF8EEDA4C398=3=EN=.html and restore the path displayed in the message to running status.
If the Offline (E) path has a PathName target ID value that is 0000000000000100 or more, it cannot be brought online by the online command or auto failback. To bring the path online, execute the dlmcfgmgr utility (dlmcfgmgr -r).
For Red Hat Enterprise Linux 9 or Oracle Linux
9, if error code 00000001 is output during OS startup in a SAN boot
environment, ignore the error because HDLM will recover the path.
|
KAPL08023-I
|
A path was recovered. PathID = aa...aa, PathName = bb...bb.cc...cc.dd...dd.ee...ee, DNum = ff...ff, HDevName = gg...gg
|
- Details
aa...aa: Path ID (same as PathID of view -path) (decimal (base-10) number)
bb...bb: Host port number (same as PathName of view -path) (hexadecimal number)
cc...cc: Bus number (same as PathName of view -path) (hexadecimal number)
dd...dd: Target ID (same as PathName of view -path) (hexadecimal number)
ee...ee: HLU number (same as PathName of view -path) (hexadecimal number)
ff...ff: Device number (same as DNum of view -path) (decimal (base-10) number)
gg...gg: Host Dev name (same as HDevName of view -path)
- Action
None.
|
KAPL08026-E
|
An error occurred on all the paths of the LU. PathID = aa...aa
|
- Details
An error occurred in the last, remaining path of an LU. (This is most likely as a result of a disconnection.)
aa...aa: Path ID (same as PathID of view -path) (decimal (base-10) number)
- Action
Errors are detected in all the paths connected to the LUs. See COM_NL_WHAT_TO_DO_FOR_A_PATH_ERROR=GUID-477D552A-B034-4CE0-AB4E-DF8EEDA4C398=3=EN=.html to make the path shown in the error message or the paths connected to the target LU.
|
KAPL08027-E
|
A path was excluded from the items subject to automatic failback. PathID = aa...aa
|
- Details
A path was excluded from being subject to automatic failbacks because the system judged that an intermittent error was occurring in that path.
aa...aa: Path ID (same as PathID of view -path) (decimal (base-10) number)
- Action
An intermittent error has occurred. Check the path for any possible problems. For details on what to do, see COM_NL_WHAT_TO_DO_FOR_A_PATH_ERROR=GUID-477D552A-B034-4CE0-AB4E-DF8EEDA4C398=3=EN=.html and switch the path shown in the message into Online.
|
KAPL08032-I
|
A path was recovered. (PathID = aa...aa)
|
- Details
The path has changed to an online status.
aa...aa: Path ID (same as PathID of view -path) (decimal (base-10) number)
- Action
None.
|
KAPL08033-E
|
No path connected to the LU that connects to Path ID (aa...aa) is in the Online(D) status.
|
- Details
Due to path failure, path deletion, or offline operation, no path connected to the LU that connects to Path ID (aa...aa) is in the Online(D) status.
aa...aa: Path ID (same as PathID of view -path) (decimal (base-10) number)
- Action
To return a path to the Online(D) status, resolve the path failure, and then execute the "dlnkmgr online -dfha" command.
|
KAPL08036-W
|
Failed to get Inquiry Page.E2h(00h) in path (aa...aa).
|
- Details
Failed to obtain the Inquiry data of the path to show in a message.
aa...aa: Path ID (same as PathID of view -path) (decimal (base-10) number)
- Action
Confirm the state of the path. After having removed an obstacle, and then execute the "dlnkmgr refresh" command.
|
KAPL08037-W
|
Failed to get Inquiry Page.E2h(01h) in path (aa...aa).
|
- Details
Failed to obtain the Inquiry data of the path to show in a message.
aa...aa: Path ID (same as PathID of view -path) (decimal (base-10) number)
- Action
Confirm the state of the path. After having removed an obstacle, and then execute the "dlnkmgr refresh" command.
|
KAPL08038-W
|
Failed to get Inquiry Page.E2h(02h) in path (aa...aa).
|
- Details
Failed to obtain the Inquiry data of the path to show in a message.
aa...aa: Path ID (same as PathID of view -path) (decimal (base-10) number)
- Action
Confirm the state of the path. After having removed an obstacle, and then execute the "dlnkmgr refresh" command.
|