KAPL04001-I
|
HDLM manager started.
|
- Action
None.
|
KAPL04002-E
|
Could not start the HDLM manager.
|
- Details
The HDLM manager failed to start because the current environment is unsuitable for the HDLM manager to run in.
- Action
Execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see DLMgetras utility for collecting HDLM error information.
|
KAPL04003-E
|
The startup parameter is invalid.
|
- Details
The HDLM manager internal parameter is invalid.
- Action
Execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see DLMgetras utility for collecting HDLM error information.
|
KAPL04004-I
|
HDLM manager will now terminate.
|
- Action
None.
|
KAPL04008-E
|
Cannot open the option definition file (aa...aa).
|
- Details
HDLM manager could not start normally because it was unable to open the option definition file.
aa...aa: Option definition file name
- Action
Check whether another program is currently using this file (for example, the file is being opened in a text editor), or whether the file has been inadvertently deleted.
|
KAPL04009-E
|
The option definition is invalid.
|
- Details
HDLM manager could not start normally because some of the definitions in the option definition file were invalid.
- Action
If the KAPL04033-W message is output after this message, execute the dlnkmgr view -sys -sfunc command, and then check the option settings.
Use the dlnkmgr set operation to return options settings back to where you had them.
If the KAPL04033-W message is not output, restart HDLM manager.
If the same error occurs, re-install HDLM. For details on the view operation, see view (displays information). For details on the set operation, see set (sets up the operating environment).
|
KAPL04010-E
|
Could not open the error log file.
|
- Details
HDLM manager cannot start normally (unable to open the error log file /var/opt/DynamicLinkManager/log/dlmmgr[1-16].log).
- Action
Check whether another program is using the file (for example, the file is being opened in a text editor), or whether the error log file has been inadvertently deleted.
|
KAPL04011-E
|
Could not output the error log file.
|
- Details
The log information could not be output to the error log file /var/opt/DynamicLinkManager/log/dlmmgr[1-16].log.
- Action
Make sure that the disk has enough unused capacity.
|
KAPL04012-E
|
Could not create a communication pipe. RC = aa...aa
|
- Details
HDLM manager could not start normally because it was unable to create a pipe file, which is used in communication with HDLM commands.
aa...aa: OS error code(decimal (base-10) number)
- Action
Execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see DLMgetras utility for collecting HDLM error information.
|
KAPL04013-E
|
Input is impossible via the communication pipe. RC = aa...aa
|
- Details
Data could not be read from the pipe file while communicating with an HDLM command.
aa...aa: OS error code (decimal (base-10) number)
- Action
Execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see DLMgetras utility for collecting HDLM error information.
|
KAPL04014-E
|
Output is impossible via the communication pipe. RC = aa...aa
|
- Details
Data could not be written to the pipe file while communicating with an HDLM command.
aa...aa: OS error code (decimal (base-10) number)
- Action
Execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see DLMgetras utility for collecting HDLM error information.
|
KAPL04019-E
|
Could not collect the error information. RC = aa...aa
|
- Details
An attempt to read the log information from the alert driver failed.
aa...aa: API return code (decimal (base-10) number)
- Action
Execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see DLMgetras utility for collecting HDLM error information.
|
KAPL04021-I
|
HDLM manager information - aa...aa
|
- Details
This information is required for resolving problems.
aa...aa: HDLM manager trace information
- Action
None.
|
KAPL04022-W
|
HDLM manager warning information - aa...aa
|
- Details
This information is required for resolving problems.
aa...aa: HDLM manager trace warning information
- Action
Execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see DLMgetras utility for collecting HDLM error information.
|
KAPL04023-E
|
HDLM manager error information - aa...aa
|
- Details
This information is required for resolving problems.
aa...aa: HDLM manager trace error information
- Action
After updating the initscripts package and restarting the OS, if the HDLM information does not exist in the /etc/rc.d/rc.sysinit file, execute the utility for updating system scripts (dlmupdatesysinit). In cases other than the above,
execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see DLMgetras utility for collecting HDLM error information.
|
KAPL04024-C
|
A critical error occurred in the HDLM manager. (aa...aa)
|
- Details
This information is required for resolving problems.
aa...aa: HDLM manager trace error information
- Action
Execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see DLMgetras utility for collecting HDLM error information.
|
KAPL04025-C
|
A memory shortage occurred in the HDLM manager.
|
- Details
There was not enough memory to run the HDLM manager processes.
- Action
To increase the amount of free memory, terminate unnecessary applications or restart the host.
|
KAPL04026-I
|
The temporary license is valid. The license expires in aa...aa days on (bb...bb).
|
- Details
aa...aa: Expiration day
bb...bb: The year of grace (4 numeric characters)/Month (01-12)/Day (01-31)
- Action
Install a permanent license by the expiration day.
|
KAPL04027-I
|
The emergency license is valid. The license expires in aa...aa days on (bb...bb).
|
- Details
aa...aa: Expiration day
bb...bb: The year of grace (4 numeric characters)/Month (01-12)/Day (01-31)
- Action
Install a permanent license by the expiration day.
|
KAPL04028-E
|
The temporary license expired.
|
- Action
Install a permanent license.
|
KAPL04029-E
|
The emergency license expired.
|
- Action
Install a permanent license.
|
KAPL04030-E
|
The temporary license has already expired.
|
- Action
Install a permanent license.
|
KAPL04031-E
|
The emergency license has already expired.
|
- Action
Install a permanent license.
|
KAPL04032-C
|
A fatal error occurred in HDLM. The system environment is invalid
|
- Details
A part of the HDLM configuration file is missing.
- Action
Re-install HDLM.
|
KAPL04033-W
|
The option definition file was re-created.
|
- Details
When an existing option definition file cannot be read, a new option definition file will be re-created by using the default values. If some of the options can be read, those values can be used. As for any remaining values, the default values will be used.
- Action
For any non-default options, use the dlnkmgr set operation to set the options again. For details on the set operation, see set (sets up the operating environment).
|
KAPL04034-E
|
An attempt to create the option definition file has failed.
|
- Details
An attempt to re-create an option definition file (/etc/opt/DynamicLinkManager/dlmmgr.xml) using the default values has failed.
- Action
Remove unnecessary files to secure unused capacity on the file system, or check the write permissions for the directory and file.
|
KAPL04035-I
|
The path health check will now start. Total number of paths = aa...aa
|
- Details
aa...aa: Total number of paths
- Action
None.
|
KAPL04036-I
|
The path health check for the path aa...aa was executed. Number of error paths = bb...bb
|
- Details
aa...aa: Number of paths targeted for path health checking.
bb...bb: Number of paths determined to have an error by path health checking.
- Action
None.
|
KAPL04042-I
|
HDLM SNMP TRAP information - aa...aa
|
- Details
All the paths that path health checking examined are fine.
aa...aa: Start or stop.
- Action
None.
|
KAPL04045-I
|
HDLM SNMP TRAP was sent. Trap ID = aa...aa, IP Address = bb...bb, Port Number= cc...cc, Community = dd...dd, Trap Data = ee...ee
|
- Details
aa...aa: Trap ID
bb...bb: Destination IP address of the trap
cc...cc: Destination port number of the trap
dd...dd: Community name given to the trap
ee...ee: Transmission data
- Action
None.
|
KAPL04047-W
|
The file does not exist. File name = aa...aa
|
- Details
aa...aa: /etc/.DynamicLinkManager/Path00
- Action
Reinstall HDLM.
|
KAPL04048-W
|
You do not have read permission for the file. File name = aa...aa
|
- Details
aa...aa: /etc/.DynamicLinkManager/Path00
- Action
Execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see DLMgetras utility for collecting HDLM error information.
|
KAPL04049-W
|
The file is invalid. File name = aa...aa
|
- Details
aa...aa: /etc/.DynamicLinkManager/Path00
- Action
Reinstall HDLM.
|
KAPL04050-E
|
The directory does not exist. Directory name = aa...aa
|
- Details
aa...aa: /HDLM installation path, /HDLM installation path/lib
- Action
Reinstall HDLM.
|
KAPL04051-E
|
The execution file does not exist. File name = aa...aa
|
- Details
aa...aa: /HDLM installation path/bin/.dlnkmgr_exe
- Action
Reinstall HDLM.
|
KAPL04052-E
|
You do not have execute permission for the file. File name = aa...aa
|
- Details
aa...aa: /HDLM installation path/bin/.dlnkmgr_exe
- Action
Execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see DLMgetras utility for collecting HDLM error information.
|
KAPL04053-W
|
The option definition file was recovered from a work file.
|
- Action
Execute the dlnkmgr view -sys command to check whether the settings are recovered. If the settings are not recovered, execute the dlnkmgr set operation to recover the settings. For details on the view operation, see view (displays information). For details on the set operation, see set (sets up the operating environment).
|