KAPL01001-I
|
The HDLM command completed normally. Operation name = aa...aa, completion time = bb...bb
|
- Details
The HDLM command completed successfully.
When the view -path, view -lu, or view -drv operation is executed, view(-pstv) is displayed if the Physical Storage View is disabled, and view(-vstv) is displayed if the Physical Storage View is disabled.
aa...aa: Specified operation name
bb...bb: Year/month/day hour:minute:second
- Action
None.
|
KAPL01002-I
|
The HDLM command started. Operation name = aa...aa
|
- Details
The HDLM command was executed.
aa...aa: Specified operation name
- Action
None.
|
KAPL01003-W
|
No operation name is specified.
|
- Details
An operation name is missing.
- Action
Specify the operation name, and then retry.
|
KAPL01004-W
|
The operation name is invalid. Operation name = aa...aa
|
- Details
aa...aa: Specified operation name
- Action
Execute the help operation of the HDLM command (dlnkmgr) to check the operation name, and then retry. For details on the help operation, see COM_MNL_HELP_(DISPLAYS_THE_OPERATION_FORMAT)=GUID-D59BBEE5-2465-440B-A459-B0DD8370E029=3=EN=.html .
|
KAPL01005-W
|
A parameter is invalid. Operation name = aa...aa, parameter = bb...bb
|
- Details
aa...aa: Specified operation name
bb...bb: Specified parameter
- Action
Execute help operation-name of the HDLM command (dlnkmgr) to check the parameter, and then retry. For details on the help operation, see COM_MNL_HELP_(DISPLAYS_THE_OPERATION_FORMAT)=GUID-D59BBEE5-2465-440B-A459-B0DD8370E029=3=EN=.html.
|
KAPL01006-W
|
A necessary parameter is not specified. Operation name = aa...aa
|
- Details
The specified operation does not contain the necessary parameter.
aa...aa: Specified operation name
- Action
Execute help operation-name of the HDLM command (dlnkmgr) to check the parameter. Specify the correct parameter, and then retry. For details on the help operation, see COM_MNL_HELP_(DISPLAYS_THE_OPERATION_FORMAT)=GUID-D59BBEE5-2465-440B-A459-B0DD8370E029=3=EN=.html.
|
KAPL01007-W
|
A duplicate parameter is specified. Operation name = aa...aa, parameter = bb...bb
|
- Details
aa...aa: Specified operation name
bb...bb: Duplicate parameter
- Action
Delete the duplicate parameter, and then retry.
|
KAPL01008-W
|
A necessary parameter value is not specified. Operation name = aa...aa, parameter = bb...bb
|
- Details
aa...aa: Specified operation name
bb...bb: Parameter name
- Action
Specify the parameter value, and then retry.
|
KAPL01009-W
|
A parameter value is invalid. Operation name = aa...aa, parameter = bb...bb, parameter value = cc...cc, Valid value = dd...dd
|
- Details
aa...aa: Specified operation name
bb...bb: Parameter name
cc...cc: Specified parameter value
dd...dd: Specifiable parameter value range
- Action
Specify a correct value for the parameter, and then retry.
|
KAPL01012-E
|
Could not connect the HDLM manager. Operation name = aa...aa
|
- Details
In the view -sys -sfunc operation, information must be collected from the HDLM manager but the manager cannot be accessed.
aa...aa: view
- Action
Execute the view operation of the HDLM command
(dlnkmgr) to check whether the HDLM manager has started.
Start the HDLM manager if it has not started, and then retry the HDLM command.
For details on the view operation, see COM_MNL_VIEW_(DISPLAYS_INFORMATION)=GUID-311C4B1B-E8E6-4963-9C3C-6D33AD0261DD=3=EN=.html.
Immediately after system startup, access might fail because the HDLM manager
has not finished starting. If this happens, wait a moment and then run the
command again.
|
KAPL01013-E
|
An error occurred in internal processing of the HDLM command. Operation name = aa...aa details = bb...bb
|
- Details
An error unrelated to a user operation occurred during command processing.
aa...aa: Specified operation name
bb...bb: The name of the function and processing on which the error occurred
- Action
Execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see DLMGETRAS_UTILITY_FOR_COLLECTING_HDLM_ERROR_INFORMATION=GUID-23937FA5-2612-443B-A4FB-FCC9CA3E70AC=3=EN=.html.
|
KAPL01014-W
|
No authority to execute the HDLM command. Operation name = aa...aa
|
- Details
You do not have the administrator permissions necessary to execute the HDLM command.
aa...aa: Specified operation name
- Action
Execute the command as a user with root permissions.
|
KAPL01015-W
|
The target HBA was not found. Operation name = aa...aa
|
- Details
The path having the host port number and bath number specified in the -hba parameter could not be found.
aa...aa: offline or online
- Action
Execute the view operation of the HDLM command (dlnkmgr view -path) and check the value displayed in PathName. Use the two leftmost digits of PathName for the relevant HBA port, and then retry. For details on the view operation, see COM_MNL_VIEW_(DISPLAYS_INFORMATION)=GUID-311C4B1B-E8E6-4963-9C3C-6D33AD0261DD=3=EN=.html.
|
KAPL01016-W
|
The target CHA port was not found. Operation name = aa...aa
|
- Details
The path ID indicated by -pathid and required by the -cha parameter is not an object of HDLM management.
aa...aa: offline or online
- Action
Execute the view operation of the HDLM command (dlnkmgr view -path) and check the value displayed in PathName. Specify the two leftmost digits of PathName for the relevant HBA port, and then retry. For details on the view operation, see COM_MNL_VIEW_(DISPLAYS_INFORMATION)=GUID-311C4B1B-E8E6-4963-9C3C-6D33AD0261DD=3=EN=.html .
|
KAPL01018-W
|
The target device was not found. Operation name = aa...aa
|
- Details
The specified host device name could not be found.
aa...aa: view
- Action
Execute the view operation of the HDLM command (dlnkmgr view -path) and check the value displayed in PathName. Specify the two leftmost digits of PathName for the relevant HBA port, and then retry. For details on the view operation, see COM_MNL_VIEW_(DISPLAYS_INFORMATION)=GUID-311C4B1B-E8E6-4963-9C3C-6D33AD0261DD=3=EN=.html.
|
KAPL01019-W
|
The target path was not found. Operation name = aa...aa
|
- Details
aa...aa: offline, online, or view
- Action
-
|
KAPL01021-E
|
Cannot execute the HDLM command due to insufficient memory.
|
- Details
Memory required for HDLM command processing could not be allocated.
- Action
Stop unnecessary applications, increase the amount of free memory, and then re-execute the HDLM command.
|
KAPL01023-W
|
The last Online path for the device cannot be placed Offline(C).
|
- Details
The path specified for the offline operation cannot be set to Offline(C) because that is the last, available path to the LU from the host.
- Action
Use the view operation of the HDLM command (dlnkmgr) to check the status of the paths. For details on the view operation, see COM_MNL_VIEW_(DISPLAYS_INFORMATION)=GUID-311C4B1B-E8E6-4963-9C3C-6D33AD0261DD=3=EN=.html.
|
KAPL01024-W
|
The specified parameters cannot be specified at the same time. Operation name = aa...aa, parameters = bb...bb
|
- Details
aa...aa: Specified operation name
bb...bb: Parameters that cannot be specified at the same time
- Action
Execute help operation of the HDLM command (dlnkmgr) to check which parameters can be specified at the same time, and then retry. For details on the help operation, see COM_MNL_HELP_(DISPLAYS_THE_OPERATION_FORMAT)=GUID-D59BBEE5-2465-440B-A459-B0DD8370E029=3=EN=.html.
|
KAPL01036-E
|
The Offline path cannot be placed online. PathID = aa...aa
|
- Details
aa...aa: Path ID (decimal (base-10) number)
- Action
Remove the error in the path, and then retry.
If the paths which a value equal or greater than 0000000000000100 is displayed for the target ID (hexadecimal number) in PathName as a result of executing the dlnkmgr command's view operation (with either the -path or -lu parameter specified) are Offline(E), these are not changed to online by using the online command or the automatic failback function. To change the paths status online, execute the dlmcfgmgr utility(dlmcfgmgr -r).
|
KAPL01039-W
|
During the online operation processing of the HDLM command, a path that cannot be placed in the Online status was detected. PathID = aa...aa Would you like to continue the processing of the online operation? [y/n]:
|
- Details
A path that cannot be placed Online was detected during multi-path online processing.
To ignore this path and perform online processing for the next path, enter y.
To cancel processing, enter n.
aa...aa: Path ID (decimal (base-10) number)
- Action
If you want to continue processing of the online operation of the HDLM command for other paths, enter y. If you want to terminate processing, enter n. For details on the online operation, see COM_MNL_ONLINE_(PLACES_PATHS_ONLINE)=GUID-1465D67A-2343-483F-A2FA-1025E1E82C32=4=EN=.html.
|
KAPL01040-W
|
The entered value is invalid. Re-enter [y/n]:
|
- Details
A value other than y and n was entered. Enter y or n.
- Action
Enter y or n.
|
KAPL01041-E
|
The entered value is invalid. The operation stops. Operation name = aa...aa
|
- Details
Command processing will be aborted because an incorrect value was entered three times in a row for a request.
aa...aa: clear, offline, online, or set
- Action
Check the correct value, and then re-execute the HDLM command.
|
KAPL01044-W
|
A duplicate parameter value is specified. Operation name = aa...aa, parameter = bb...bb, parameter value = cc...cc
|
- Details
aa...aa: view
bb...bb: Parameter name
cc...cc: Duplicate parameter value
- Action
Delete the duplicate parameter value, and then retry.
|
KAPL01045-W
|
Too many parameter values are specified. Operation name = aa...aa, parameters = bb...bb, parameter value = cc...cc
|
- Details
aa...aa: offline, online, set, or view
bb...bb: Parameter name
cc...cc: Parameter value
- Action
Execute help operation-name of the HDLM command (dlnkmgr) to check the parameter value, and then retry. For details on the help operation, see COM_MNL_HELP_(DISPLAYS_THE_OPERATION_FORMAT)=GUID-D59BBEE5-2465-440B-A459-B0DD8370E029=3=EN=.html.
|
KAPL01048-W
|
Help information cannot be found. Operation name = aa...aa.
|
- Details
The specified operation is not an operation of the HDLM command.
aa...aa: Specified operation name
- Action
Use the help operation of the HDLM command (dlnkmgr) to check the operation name. And then retry. For details on the help operation, see COM_MNL_HELP_(DISPLAYS_THE_OPERATION_FORMAT)=GUID-D59BBEE5-2465-440B-A459-B0DD8370E029=3=EN=.html.
|
KAPL01049-I
|
Would you like to execute the operation? Operation name = aa...aa [y/n]:
|
- Details
The clear/set operation will be started. To continue the operation, enter y. To cancel the operation, enter n.
aa...aa: clear or set
- Action
If you want to execute the operation, enter y. If you want to terminate processing, enter n. For details on the clear operation, see COM_MNL_CLEAR_(RETURNS_THE_PATH_STATISTICS_TO_THE_INITIAL_VALUE)=GUID-38CB6E46-33AD-4900-A011-3F2687D6F85C=3=EN=.html. For details on the set operation, see COM_MNL_SET_(SETS_UP_THE_OPERATING_ENVIRONMENT)=GUID-D5D49D56-5FD4-47C9-B3EF-F783D00A63D0=3=EN=.html.
|
KAPL01050-I
|
The currently selected paths will be changed to the Online status. Is this OK? [y/n]:
|
- Details
The online operation will be started. To continue the online operation, enter y. To cancel the operation, enter n.
- Action
If you want to execute online processing, enter y. If you want to terminate processing, enter n. For details on the online operation, see COM_MNL_ONLINE_(PLACES_PATHS_ONLINE)=GUID-1465D67A-2343-483F-A2FA-1025E1E82C32=4=EN=.html.
|
KAPL01051-I
|
Because no path has been selected among the currently displayed paths, the paths in the Offline(C), Offline(E), and Online(E) statuses will be changed to the Online status. Is this OK? [y/n]:
|
- Details
All the paths will be placed Online because the path selection parameter is not specified for the online operation. To place all the paths Online, enter y. To cancel the operation, enter n.
- Action
If you want to execute online processing, enter y. If you want to terminate processing, enter n. Before you execute the processing, be sure to execute the view operation of the HDLM command (dlnkmgr) to check the path status. For details on the view operation, see COM_MNL_VIEW_(DISPLAYS_INFORMATION)=GUID-311C4B1B-E8E6-4963-9C3C-6D33AD0261DD=3=EN=.html. For details on the online operation, see COM_MNL_ONLINE_(PLACES_PATHS_ONLINE)=GUID-1465D67A-2343-483F-A2FA-1025E1E82C32=4=EN=.html.
|
KAPL01052-I
|
The currently selected paths will be changed to the Offline(C) status. Is this OK? [y/n]:
|
- Details
The offline operation will be started. To continue the offline operation, enter y. To cancel the operation, enter n.
- Action
If you want to execute the offline processing, enter y. If you want to terminate processing, enter n. For details on the offline operation, see COM_NL_OFFLINE_(PLACES_PATHS_OFFLINE)=GUID-E31AE476-5ECD-4BE5-A0B2-AB86C1074B74=2=EN=.html.
|
KAPL01053-I
|
If you are sure that there would be no problem when the path is placed in the Offline(C) status, enter y. Otherwise, enter n. [y/n]:
|
- Details
The offline operation will be started. To continue the offline operation, enter y. To cancel the operation, enter n.
- Action
If you want to execute offline processing, enter y. If you want to terminate processing, enter n. For details on the offline operation, see COM_NL_OFFLINE_(PLACES_PATHS_OFFLINE)=GUID-E31AE476-5ECD-4BE5-A0B2-AB86C1074B74=2=EN=.html.
|
KAPL01054-W
|
During the offline operation processing of the HDLM command, a path that cannot be placed in the Offline(C) status was detected. PathID = aa...aa Would you like to continue the processing of the offline operation? [y/n]:
|
- Details
A path that cannot be set to Offline(C) was detected during multi-path offline processing. To ignore this path and perform offline processing for the next path, enter y. To cancel offline processing, enter n.
aa...aa: Path ID (decimal (base-10) number)
- Action
If you want to continue processing the offline operation of the HDLM command for other paths, enter y. If you want to terminate processing, enter n. For details on the offline operation, see COM_NL_OFFLINE_(PLACES_PATHS_OFFLINE)=GUID-E31AE476-5ECD-4BE5-A0B2-AB86C1074B74=2=EN=.html.
|
KAPL01055-I
|
All the paths which pass the specified aa...aa will be changed to the Offline(C) status. Is this OK? [y/n]:
|
- Details
Multiple paths will be collectively set to Offline(C) because the -hba or -cha parameter was specified. To collectively set multiple paths to Offline(C), enter y. To cancel the operation, enter n.
aa...aa: CHA port or HBA
- Action
If you want to execute offline processing for the paths that meet the specified requirements, enter y. If you want to terminate processing, enter n.
|
KAPL01056-I
|
If you are sure that there would be no problem when all the paths which pass the specified aa...aa are placed in the Offline(C) status, enter y. Otherwise, enter n. [y/n]:
|
- Details
This message re-asks the user whether they want to set all the paths to Offline(C). To set all the paths to Offline(C), enter y. To cancel the operation, enter n.
aa...aa: CHA port or HBA
- Action
If you want to execute offline processing for the paths that meet the specified requirements, enter y. If you want to terminate processing, enter n.
|
KAPL01057-I
|
All the paths which pass the specified aa...aa will be changed to the Online status. Is this OK? [y/n]:
|
- Details
All multiple paths will place online status because the -hba or -cha parameter was specified. To continue this operation, enter y. To discontinue this operation, enter n.
aa...aa: CHA port or HBA
- Action
If you want to execute online processing for the paths that meet the specified requirements, enter y. If you want to terminate processing, enter n.
|
KAPL01058-W
|
The specified parameter value is not needed. Operation name = aa...aa, parameter = bb...bb, parameter value = cc...cc
|
- Details
A parameter value was specified in a parameter that does not need a parameter value.
aa...aa: Specified operation name
bb...bb: Parameter name
cc...cc: Parameter value
- Action
Execute help operation-name of the HDLM command (dlnkmgr) to check the parameter and parameter value, and then retry. For details on the help operation, see COM_MNL_HELP_(DISPLAYS_THE_OPERATION_FORMAT)=GUID-D59BBEE5-2465-440B-A459-B0DD8370E029=3=EN=.html.
|
KAPL01059-W
|
Cannot specify the parameter aa...aa at the same time if you specify parameter bb...bb and parameter value cc...cc. Operation name = dd...dd
|
- Details
A parameter value is conflicting with the value of another parameter.
aa...aa: Parameter name
bb...bb: Parameter name
cc...cc: Parameter value
dd...dd: view or set
- Action
Execute help operation-name of the HDLM command (dlnkmgr) to check the parameter and parameter value, and then retry. For details on the help operation, see COM_MNL_HELP_(DISPLAYS_THE_OPERATION_FORMAT)=GUID-D59BBEE5-2465-440B-A459-B0DD8370E029=3=EN=.html.
|
KAPL01060-I
|
The user terminated the operation. Operation name = aa...aa
|
- Details
Command processing will be aborted because n was entered for a required confirmation.
aa...aa: online, offline, set, or clear
- Action
None.
|
KAPL01061-I
|
aa...aa path(s) were successfully placed bb...bb; cc...cc path(s) were not. Operation name = dd...dd
|
- Details
This message indicates the number of the paths processed in an online/offline operation.
aa...aa: Number of paths where the online/offline operation was successful (decimal (base-10) number)
bb...bb: Online, Online(S), Online(D) or Offline(C)
cc...cc: Number of paths where the online/offline operation was unsuccessful (decimal (base-10) number)
dd...dd: online or offline
- Action
None. For details on the online operation, see COM_MNL_ONLINE_(PLACES_PATHS_ONLINE)=GUID-1465D67A-2343-483F-A2FA-1025E1E82C32=4=EN=.html. For details on the offline operation, see COM_NL_OFFLINE_(PLACES_PATHS_OFFLINE)=GUID-E31AE476-5ECD-4BE5-A0B2-AB86C1074B74=2=EN=.html.
|
KAPL01063-I
|
The target path(s) are already aa...aa.
|
- Details
As a result of a previous online/offline operation, the specified path has already been set to Online/Online(S)/Online(D)/Offline(C).
aa...aa: Online, Online(S), Online(D) or Offline(C)
- Action
Use the view operation of the HDLM command (dlnkmgr) to check the status of the path. For details on the view operation, see COM_MNL_VIEW_(DISPLAYS_INFORMATION)=GUID-311C4B1B-E8E6-4963-9C3C-6D33AD0261DD=3=EN=.html. For details on the online operation, see COM_MNL_ONLINE_(PLACES_PATHS_ONLINE)=GUID-1465D67A-2343-483F-A2FA-1025E1E82C32=4=EN=.html. For details on the offline operation, see COM_NL_OFFLINE_(PLACES_PATHS_OFFLINE)=GUID-E31AE476-5ECD-4BE5-A0B2-AB86C1074B74=2=EN=.html.
For Online(S) or Online(D) paths:
To change the status of a path from Online(S) or Online(D) to Online, re-execute the HDLM command using the -hapath parameter.
|
KAPL01068-I
|
Enter a license key:
|
- Details
The license key will now be renewed. Enter a license key.
- Action
None.
|
KAPL01069-W
|
The entered license key is invalid.
|
- Details
The entered license key is invalid.
- Action
Enter a valid license key.
|
KAPL01070-E
|
The entered license key is invalid. Renewal of the license key will now stop.
|
- Details
The license key renewal processing will be aborted because an invalid license key was entered three times in a row.
- Action
Obtain a valid license key, and then retry.
|
KAPL01071-I
|
The permanent license was installed.
|
- Details
The license was renewed and is registered as a permanent license.
- Action
None.
|
KAPL01072-I
|
The emergency license was installed. The license expires on aa...aa.
|
- Details
A license was renewed and is registered as an emergency license.
aa...aa: Year (4 digits)/month (01-12)/day (01-31)
- Action
Install a permanent license by the expiration day.
|
KAPL01073-E
|
The temporary license expired.
|
- Details
The temporary license has expired. Register a permanent license.
- Action
Register a permanent license.
|
KAPL01074-E
|
The emergency license expired.
|
- Details
The emergency license has expired. Register a permanent license.
- Action
Register a permanent license.
|
KAPL01075-E
|
A fatal error occurred in HDLM. The system environment is invalid.
|
- Details
The license information file is missing.
- Action
Re-install HDLM.
|
KAPL01076-I
|
The permanent license has been installed.
|
- Details
You need not install a license because a permanent license has already been installed.
- Action
None.
|
KAPL01079-W
|
The intermittent error monitoring function cannot be set up because automatic failback is disabled.
|
- Details
The intermittent error monitoring function cannot be set up because automatic failbacks are disabled.
- Action
Enable automatic failbacks, and then re-execute.
|
KAPL01080-W
|
The error monitoring interval and the number of times that the error is to occur conflict with the automatic failback checking interval.
|
- Details
An intermittent error cannot be detected by using the values specified for the following: the checking interval for automatic failbacks, the error-monitoring interval, and the number of times the error needs to occur.
- Action
Set the intermittent error-monitoring interval to a value that is equal to or greater than (automatic-failback-checking-interval x number-of-times-error-is-to-occur-for-intermittent-error-monitoring).
|
KAPL01081-E
|
The license key file is invalid. File name = aa...aa
|
- Details
The format of the license key file is invalid.
aa...aa: /var/tmp/hdlm_license
- Action
Save the correct license key file in the designated, and then re-execute.
/var/tmp/hdlm_license
|
KAPL01082-E
|
There is no installable license key in the license key file. File name = aa...aa
|
- Details
There is no useable license key for HDLM in the license key file.
aa...aa: /var/tmp/hdlm_license
- Action
Make sure that the license key file is correct, and then re-execute.
/var/tmp/hdlm_license
|
KAPL01083-I
|
There is no license key file. File name = aa...aa
|
- Details
There is no license key file in the designated directory:
aa...aa: /var/tmp/hdlm_license
- Action
When the message that prompts you to enter the license key is displayed, enter the license key.
Alternatively, cancel the HDLM command, save the correct license key file in the designated directory, and then re-execute the HDLM command.
|
KAPL01084-W
|
An attempt to delete the license key file has failed. File name = aa...aa
|
- Details
aa...aa: /var/tmp/hdlm_license
- Action
If the following license key file exists, delete it: /var/tmp/hdlm_license.
|
KAPL01088-W
|
The specified parameter values cannot be specified at the same time. Operation name = aa...aa, parameter = bb...bb, parameter values = cc...cc
|
- Details
aa...aa: view
bb...bb: Parameter name
cc...cc: Parameter values that cannot be specified at the same time
- Action
Execute help operation-name of the HDLM command (dlnkmgr) to check which parameter can be specified, and then retry. For details on the help operation, see COM_MNL_HELP_(DISPLAYS_THE_OPERATION_FORMAT)=GUID-D59BBEE5-2465-440B-A459-B0DD8370E029=3=EN=.html.
|
KAPL01089-E
|
One of the following was executed at the same time as an HDLM command set -lic operation: another set -lic operation, or an update of the license for an update installation.
|
- Action
Check the license by using the HDLM command's view -sys -lic operation. If necessary, re-execute the HDLM command's set -lic operation. If the same error message is output again, contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM.
Do not perform the following operations:
Simultaneously execute the HDLM command's set -lic operation with the view -sys -lic operation.
Execution of the HDLM command's set -lic operation simultaneously with an update of the license for an upgrade or re-installation.
|
KAPL01095-E
|
An attempt to acquire the HDLM version information has failed. details = aa...aa
|
- Details
aa...aa: Code showing the reason for the error
- Action
Re-execute the command. If the same error occurs again, execute the DLMgetras utility for collecting HDLM error information, acquire the error information, and then contact your HDLM vendor or the company for which you have a service contract.
|
KAPL01096-E
|
An attempt to acquire the Service Pack version information has failed. details = aa...aa
|
- Details
aa...aa: Code showing the reason for the error
- Action
Re-execute the command. If the same error occurs again, execute the DLMgetras utility for collecting HDLM error information, acquire the error information, and then contact your HDLM vendor or the company for which you have a service contract.
|
KAPL01097-W
|
All the current trace files will be deleted. Is this OK? [y/n]
|
- Details
If you set a value that is less than the current value of the trace file size or number of trace files, all the current trace files will be deleted. To continue the operation, enter y. To cancel the operation, enter n.
- Action
If you want to execute the operation of the HDLM command, enter y. If you want to terminate processing, enter n.
|
KAPL01100-I
|
aa...aa
|
- Details
This message indicates the executed command line.
aa...aa: Name of the executed command.
- Action
None.
|
KAPL01107-I
|
The load balancing type specified for individual LUs will become invalid when this operation is executed. Do you want to execute the operation anyway? Operation name = set [y/n]:
|
- Action
If you want to change the load balancing algorithm for the system, enter y. If you want to terminate processing, enter n.
|
KAPL01111-E
|
The version of the kernel supported by the installed HDLM does not match the currently running kernel version.
|
- Details
The version of the kernel to which installed HDLM has adjusted and the kernel that is running now is not corresponding. There is a possibility of installing the package of the kernel after installing HDLM.
- Action
Install HDLM that adjusts to the kernel that is running now.
|
KAPL01112-E
|
An attempt to connect to the HDLM driver has failed. Operation name = aa...aa
|
- Details
HDLM driver information must be collected to execute the given HDLM command, but the HDLM driver cannot be accessed.
aa...aa: Specified operation name
- Action
If you did not perform HDLM configuration, Perform HDLM configuration.
When performing neither of the above, or if the same error continues to occur even after one of the above procedures is performed, execute the utility for collecting HDLM error information (DLMgetras) to collect the error information, and then contact your HDLM vendor or maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see DLMGETRAS_UTILITY_FOR_COLLECTING_HDLM_ERROR_INFORMATION=GUID-23937FA5-2612-443B-A4FB-FCC9CA3E70AC=3=EN=.html.
|
KAPL01113-E
|
The HDLM file is invalid. File name = aa...aa
|
- Details
A file necessary for processing HDLM cannot be found. Alternatively, the content of a file is invalid.
aa...aa: Name of file where error was detected.
- Action
Reinstall an HDLM.
|
KAPL01114-W
|
The audit log configuration file does not exist. Restart the HDLM Manager, and execute the "dlnkmgr view -sys -audlog" command and check the setting.
|
- Details
The audit log configuration file does not exist.
- Action
Restart the HDLM Manager, and execute the dlnkmgr view -sys -audlog command, and then specify the desired setting by using the dlnkmgr set -audlog command or the dlnkmgr set -audfac command as necessary.
|
KAPL01115-W
|
The audit log configuration file cannot be opened. Execute the "dlnkmgr view -sys -audlog" command and check whether a normal result is displayed.
|
- Details
The audit log configuration file cannot be opened.
- Action
If the dlnkmgr view -sys -audlog command does not display a normal result, contact your HDLM vendor or maintenance company if there is a maintenance contract for HDLM.
|
KAPL01116-W
|
The audit log configuration file is invalid. Restart the HDLM Manager, and execute the "dlnkmgr view -sys -audlog" command and check the setting.
|
- Details
The audit log configuration file is invalid.
- Action
Restart the HDLM Manager, and execute the dlnkmgr view -sys -audlog command, and then specify the desired setting by using the dlnkmgr set -audlog command or the dlnkmgr set -audfac command as necessary.
|
KAPL01117-W
|
An error occurred during processing to read the audit log configuration file.
|
- Details
An internal error occurred while reading the audit log configuration file.
- Action
Contact your HDLM vendor or maintenance company if there is a maintenance contract for HDLM.
|
KAPL01118-W
|
An error occurred during processing to output the audit log configuration file.
|
- Details
An internal parameter error when the audit-log data was output.
- Action
Contact your HDLM vendor or maintenance company if there is a maintenance contract for HDLM.
|
KAPL01119-W
|
An error occurred during processing to output the audit log configuration file.
|
- Details
An internal parameter error when the audit-log data was output.
- Action
Contact your HDLM vendor or maintenance company if there is a maintenance contract for HDLM.
|
KAPL01120-W
|
A storage system model ID could not be displayed. Details = aa...aa, bb...bb
|
- Details
A storage system model ID could not be displayed.
aa...aa: Storage recognition information
bb...bb: Error code
- Action
Execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see DLMGETRAS_UTILITY_FOR_COLLECTING_HDLM_ERROR_INFORMATION=GUID-23937FA5-2612-443B-A4FB-FCC9CA3E70AC=3=EN=.html.
|
KAPL01122-W
|
The file does not exist. File name = aa...aa
|
- Details
aa...aa: /etc/.DynamicLinkManager/Path00
- Action
Reinstall HDLM.
|
KAPL01123-W
|
You do not have read permission for the file. File name = aa...aa
|
- Details
aa...aa: /etc/.DynamicLinkManager/Path00
- Action
Execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see DLMGETRAS_UTILITY_FOR_COLLECTING_HDLM_ERROR_INFORMATION=GUID-23937FA5-2612-443B-A4FB-FCC9CA3E70AC=3=EN=.html.
|
KAPL01124-W
|
The file is invalid. File name = aa...aa
|
- Details
aa...aa: /etc/.DynamicLinkManager/Path00
- Action
Reinstall HDLM.
|
KAPL01125-E
|
The directory does not exist. Directory name = aa...aa
|
- Details
aa...aa: /HDLM installation path, /HDLM installation path/lib
- Action
Reinstall HDLM.
|
KAPL01126-E
|
The execution file does not exist. File name = aa...aa
|
- Details
aa...aa: /HDLM installation path/bin/.dlnkmgr_exe
- Action
Reinstall HDLM.
|
KAPL01127-E
|
You do not have execute permission for the file. File name = aa...aa
|
- Details
aa...aa: /HDLM installation path/bin/.dlnkmgr_exe
- Action
Execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see COM_MNL_CLEAR_(RETURNS_THE_PATH_STATISTICS_TO_THE_INITIAL_VALUE)=GUID-38CB6E46-33AD-4900-A011-3F2687D6F85C=3=EN=.html.
|
KAPL01128-W
|
HNTRLib2 initialization failed. Trace per process information cannot be collected.
|
- Details
HNTRLib2 initialization failed. Integrated trace information cannot be collected.
- Action
Execute the HDLM command as a user who has root permissions.
If neither of above are the source of the problem, execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM.
For details on the DLMgetras utility, see DLMGETRAS_UTILITY_FOR_COLLECTING_HDLM_ERROR_INFORMATION=GUID-23937FA5-2612-443B-A4FB-FCC9CA3E70AC=3=EN=.html.
|
KAPL01133-I
|
aa...aa path(s) were successfully placed bb...bb; cc...cc path(s) were successfully placed dd...dd; ee...ee path(s) were not. Operation name = ff...ff
|
- Details
The number of paths processed by an online operation is shown.
aa...aa: The number of paths which changed to the Online status
bb...bb: Online or Online(S)
cc...cc: The number of paths which changed to the Online(S) or Online(D) status
dd...dd: Online(S), Online(D) or Online(S)/Online(D)
ee...ee: The number of paths which failed to change to either the Online, Online(S) or Online(D) status
ff...ff: online
- Action
None.
|
KAPL01134-I
|
The target paths are already Online or Online(S).
|
- Details
The specified paths are already in the Online or Online(S) status as a result of an online operation.
- Action
Check path status by using the view operation. For details on the view operation, see COM_MNL_VIEW_(DISPLAYS_INFORMATION)=GUID-311C4B1B-E8E6-4963-9C3C-6D33AD0261DD=3=EN=.html.
For Online(S) paths:
To change the status of a path from Online(S) to Online, re-execute the HDLM command using the -hapath parameter.
|
KAPL01159-I
|
Paths were added. (number of paths added = aa...aa, completion time = bb...bb)
|
- Details
This message indicates that an add operation succeeded.
aa...aa: number of paths added
bb...bb: year (4 digits)/month/date hour:minute:second
- Action
Use the view operation of the HDLM command (dlnkmgr) to verify information about the added paths.
|
KAPL01160-W
|
The path configuration was not changed.
|
- Details
- If an add operation was executed
This message indicates that no paths were added.
- If a delete operation was executed
This message indicates that no paths were deleted.
- Action
- If an add operation was executed
- Execute an OS command, and check whether the addition of paths is recognized by the OS.
- Use the view operation of the HDLM command (dlnkmgr) to check whether the paths have already been added to HDLM.
- If a delete operation was executed
- Check whether the paths to be deleted have been disconnected from the system.
- Use the view operation of the HDLM command (dlnkmgr) to check whether the paths have already been deleted from HDLM.
|
KAPL01161-I
|
This operation will change the path configuration. Do you want to continue? [y/n]:
|
- Details
This message confirms whether to perform a path configuration change by using an add operation or delete operation.
- Action
Enter y to change the path configuration, or enter n to cancel the operation.
|
KAPL01162-I
|
A path was added. (path ID = aa...aa, storage = bb...bb, iLU = cc...cc)
|
- Details
This message displays information about a path added as the result of an add operation.
aa...aa: path ID of the added path
bb...bb: storage (vendor ID.product ID.serial number) to which the added path is connected
cc...cc: LU number to which the added path is connected
- Action
Use the view operation of the HDLM command (dlnkmgr) to verify information about the added paths.
|
KAPL01163-E
|
The path configuration change failed. (details = aa...aa)
|
- Details
This message indicates that an add operation or delete operation failed.
aa...aa: code indicating the content of the error
- Action
Execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or, if you have a maintenance contract for HDLM, the maintenance company.
|
KAPL01164-I
|
Paths were deleted. (number of paths deleted = aa...aa, completion time = bb...bb)
|
- Details
This message indicates that a delete operation succeeded.
aa...aa: number of paths deleted
bb...bb: year (4 digits)/month/date hour:minute:second
- Action
Use the view operation of the HDLM command (dlnkmgr) to verify that the paths were deleted.
|
KAPL01165-I
|
A path was deleted. (path ID = aa...aa, storage = bb...bb, iLU = cc...cc)
|
- Details
This message displays information about a path deleted as the result of a delete operation.
aa...aa: path ID of the deleted path
bb...bb: storage (vendor ID.product ID.serial number) to which the deleted path was connected
cc...cc: LU number to which the deleted path was connected
- Action
Use the view operation of the HDLM command (dlnkmgr) to verify that the paths were deleted.
|
KAPL01166-I
|
If you execute this operation, the specified number of times that the same path can be used for individual LUs will become invalid. Do you want to execute the operation anyway? Operation name = set [y/n]:
|
- Details
The specified number of times that the same path can be used for individual LUs will become invalid. To continue the operation, enter y. To cancel the operation, enter n.
- Action
If you want to change the number of times that the same path can be used for the system, enter y. To cancel the operation, enter n.
|
KAPL01167-I
|
All paths will be set to Online or Online(D). Is this OK? [y/n]:
|
- Details
All paths will be set to Online or Online(D) because no path is specified. To continue, enter y. To cancel the operation, enter n.
- Action
To set all paths to Online or Online(D), enter y. To cancel the operation, enter n. Before you execute the processing, you must check the path status by executing the view operation of the HDLM command dlnkmgr.
|
KAPL01168-I
|
All P-VOL paths that are connected to the LU that has the specified path ID will be set to Online(D). Is this OK? [y/n]:
|
- Details
All paths for each specified LU will be set to Online or Online(D). To continue, enter y. To cancel the operation, enter n.
Note: All paths of the LU, including non-P-VOL paths, will be set to Online or Online(D).
- Action
To set to Online or Online(D) all paths that are connected to the LU that has the specified path ID, enter y. To cancel the process, enter n.
|
KAPL01169-I
|
All Online(S) or Online(D) paths will be set to Online. Is this OK? [y/n]:
|
- Details
All paths in the Online(S) or Online(D) status will be set to Online because no path is specified. To continue, enter y. To cancel the operation, enter n.
- Action
To execute online processing, enter y. To cancel the operation, enter n. Before you execute the processing, you must check the path status by executing the view operation of the HDLM command dlnkmgr.
|
KAPL01170-I
|
All Online(S) or Online(D) paths that are connected to the LU that has the specified path ID will be set to Online. Is this OK? [y/n]:
|
- Details
All paths in the Online(S) or Online(D) status for each specified LU will be set to Online. To continue, enter y. To cancel the operation, enter n.
- Action
To set to online the all Online(S) or Online(D) paths that are connected to the specified LU with path ID, enter y. To cancel the operation, enter n.
|
KAPL01171-I
|
The target paths are already aa...aa or bb...bb.
|
- Details
The specified paths are already in the Online, Online(S), or Online(D) status as a result of an online operation.
aa...aa: Online or Online(S)
bb...bb: Online(D) or Online(S)/Online(D)
- Action
Check path status by using the view operation. For Online(S) or Online(D) paths: To change the status of a path from Online(S) or Online(D) to Online, re-execute the HDLM command with the -hapath parameter specified.
|
KAPL01172-I
|
There are no Online(S)/Online(D) paths among the target paths.
|
- Details
An online operation was executed using the -hapath parameter, but there are no paths with the Online(S)/Online(D) status among the specified paths.
- Action
Use the view operation of the HDLM command (dlnkmgr) to check the status of the path.
|
KAPL01174-W
|
If the Physical Storage View is disabled, the parameter value aa...aa cannot be specified for the -item parameter.
|
- Details
If the Physical Storage View is disabled, the parameter value shown cannot be specified.
aa...aa: virt
- Action
When specifying virtual storage information as a display item, enable the Physical Storage View.
|
KAPL01175-W
|
If the Physical Storage View is enabled, the parameter value aa...aa cannot be specified for the -item parameter.
|
- Details
If the Physical Storage View is enabled, the parameter value shown cannot be specified.
aa...aa: phys
- Action
When specifying physical storage information as a display item, disable the Physical Storage View.
|
KAPL01176-I
|
Some of the target paths are in the offline status. Storage system settings are not refreshed for offline paths.
|
- Details
HDLM cannot refresh storage system settings for offline paths, because HDLM cannot acquire the settings.
- Action
Place online the paths for which HDLM will refresh storage system settings, and execute the refresh operation.
|
KAPL01177-W
|
HDLM failed to acquire storage system settings for some paths.
|
- Details
HDLM failed to acquire storage system settings for some paths.
- Action
If this message is output when path errors occur during a refresh operation, recover from the path errors, place the paths online, and then re-execute the refresh operation. If this message is output when there are no offline paths, execute the DLMgetras utility to collect error information, and then contact your vendor or maintenance company.
|
KAPL01178-E
|
HDLM failed to refresh the storage system settings. Details = aa...aa, bb...bb
|
- Details
aa...aa: Detailed information 1
bb...bb: Detailed information 2
- Action
Execute the DLMgetras utility to collect error information, and then contact your vendor or maintenance company.
|
KAPL01185-I
|
The automatic failback function was enabled, but the automatic failback check interval was not changed.
|
- Details
The specified automatic failback check interval conflicts with the error monitoring interval and the number of times that the error occurs.
The automatic failback function was enabled, but the automatic failback check interval was not changed.
- Action
Set an automatic failback check interval that satisfies the following conditions:
error-monitoring-interval >= checking-interval-for-automatic-failback x number-of-times-error-is-to-occur-during-intermittenterror-monitoring
|