This section explains how to display LU information by using an HDLM command.
To display LU information, execute the dlnkmgr command's view operation with the -lu parameter specified. The following is an example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -lu
Product : VSP_5000
SerialNumber : 39304
LUs : 3
iLU HDevName Device PathID Status
000BE0 sddlmad /dev/sdk 000006 Online
/dev/sdh 000007 Online
000BE1 sddlmae /dev/sdm 000008 Online
/dev/sdi 000009 Online
000BE2 sddlmaf /dev/sdo 000010 Online
/dev/sdj 000011 Online
Product : VSP_Gx00
SerialNumber : 410025
LUs : 3
iLU HDevName Device PathID Status
001800 sddlmaa /dev/sdb 000000 Online
/dev/sde 000001 Online
001801 sddlmab /dev/sdc 000002 Online
/dev/sdf 000003 Online
001802 sddlmac /dev/sdd 000004 Online
/dev/sdg 000005 Online
KAPL01001-I The HDLM command completed normally. Operation name = view(-vstv), completion time = yyyy/mm/dd hh:mm:ss
#
For details on the displayed items and their descriptions, see COM_MNL_VIEW_(DISPLAYS_INFORMATION)=GUID-311C4B1B-E8E6-4963-9C3C-6D33AD0261DD=3=EN=.html.