- -drv
Using this parameter displays the PathID, the HDLM device, SCSI device for the HDLM device, and information on the LDEV in the storage system (storage system model name, serial number, and LU number, separated by period).
For details on the contents of each display item, see Table 1.
The sub-parameters are as follows:
- -pstv|-vstv
If the -pstv parameter is specified, information about the physical storage system is displayed. If the -vstv parameter is specified, information about the storage system recognized by the operating system is displayed. If neither parameter is specified, information is displayed according to the value specified in the -pstv parameter of set operations.
For information about the items that are displayed differently depending on the specified -pstv and -vstv parameters, see TO_SET_UP_THE_HDLM_OPERATING_ENVIRONMENT=GUID-D1BCA75A-32B0-45BF-A8E5-66FBD9877543=2=EN=.html#GUID-D1BCA75A-32B0-45BF-A8E5-66FBD9877543__HYO07004V080001 in COM_MNL_SET_PARAMETERS=GUID-E0421F57-550A-4B0B-9D4C-92F402D6FB0A=4=EN=.html.
Item |
Description |
|
|---|---|---|
PathID |
AutoPATH_ID indicated by a decimal number. AutoPATH_ID is assigned when the host is restarted. When a new LU was added and the host has not been restarted, AutoPATH_ID is re-assigned to each path of the LU when you execute the HDLM-configuration definition utility (dlmcfgmgr). |
|
HDevName |
Host device name. The name of the logical device file (minus the partition number), /dev/sddlm[aa-pap], for the HDLM device. For details on logical device files for HDLM devices, see LOGICAL_DEVICE_FILES_FOR_HDLM_DEVICES=GUID-1FB8E878-1356-4536-B854-9F544BC9B9C6=2=EN=.html. |
|
Device |
SCSI device associated with an HDLM device. If the SCSI device is not connected when a host starts, or the assigned LU is released, this column displays a hyphen (-). |
|
LDEV |
The model ID, serial number, and iLU number for the storage system, separated by periods. Information about LDEV can identify an actual device that is managed by HDLM. |
|
- Example
To display corresponding information about an HDLM device, SCSI device, and LDEV
# /opt/DynamicLinkManager/bin/dlnkmgr view -drv PathID HDevName Device LDEV 000000 sddlmaa /dev/sdh VSP_Gx00.410025.00280B 000001 sddlmab /dev/sdi VSP_Gx00.410025.00280C 000002 sddlmac /dev/sdj VSP_Gx00.410025.00280D 000003 sddlmaa /dev/sdk VSP_Gx00.410025.00280B 000004 sddlmab /dev/sdl VSP_Gx00.410025.00280C 000005 sddlmac /dev/sdm VSP_Gx00.410025.00280D 000006 sddlmaa /dev/sdn VSP_Gx00.410025.00280B 000007 sddlmab /dev/sdo VSP_Gx00.410025.00280C 000008 sddlmac /dev/sdp VSP_Gx00.410025.00280D 000009 sddlmaa /dev/sdq VSP_Gx00.410025.00280B 000010 sddlmab /dev/sdr VSP_Gx00.410025.00280C 000011 sddlmac /dev/sds VSP_Gx00.410025.00280D KAPL01001-I The HDLM command completed normally. Operation name = view(-vstv), completion time = yyyy/mm/dd hh:mm:ss #