The device parameter (HORCM_DEV) defines the RAID storage system device addresses for the paired logical volume names. When the server is connected to two or more storage systems, the unit ID is expressed by port number extension. Each group name is a unique name discriminated by a server which uses the volumes, the data attributes of the volumes (such as database data, log file, UNIX file), recovery level, and so on. The group and paired logical volume names described in this item must reside in the remote server. The hardware SCSI/fibre port, target ID, and LUN as hardware components need not be the same.
The following values are defined in the HORCM_DEV parameter:
- dev_group: Names a group of paired logical volumes. A command is executed for all corresponding volumes according to this group name.
- dev_name: Names the paired logical volume within a group (i.e., name of the special file or unique logical volume). The name of paired logical volume must be different than the "dev name" on another group.
- Port#: Defines the RAID storage system port number of the volume that corresponds with the
dev_name volume.
For details about specifying Port#, see Specifying Port# below.
- Target ID: Defines the SCSI/fibre target ID number of the physical volume on the specified port.
- LU#: Defines the SCSI/fibre logical unit number (LU#) of the physical volume on the specified target ID and port.
For Fibre Channel, if the TID and LU# displayed on the system are different from the TID in the fibre address conversion table, then use the TID and LU# indicated by the raidscan command in the CCI configuration definition file.
- MU# for ShadowImage/Copy-on-Write Snapshot: Defines the mirror unit number (0 to 2) if using redundant mirror for the identical LU on ShadowImage. If this number is omitted it is assumed to be zero (0). The cascaded mirroring of the S-VOL is expressed as virtual volumes using the mirror descriptors (MU#1 to 2) in the configuration definition file. The MU#0 of a mirror descriptor is used for connection of the S-VOL. The mirror descriptor (MU#0 to 2) can be used on ShadowImage and Copy-on-Write Snapshot. MU#3 to 63 can be used only on Copy-on-Write Snapshot. When you enter the MU number for a ShadowImage/Copy-on-Write Snapshot pair into the configuration definition file, specify only the number, for example, “0” or “1”. Note: When you enter the MU number for a ShadowImage/Copy-on-Write Snapshot pair into the configuration definition file, if you add an "h" before the number, for example, "h0" or "h1", it might not be recognized as aShadowImage/Copy-on-Write Snapshot pair and might not be operated.
Feature
SMPL
P-VOL
S-VOL
MU#0 to 2
MU#3 to 63
MU#0 to 2
MU#3 to 63
MU#0
MU#1 to 63
ShadowImage
Valid
Not valid
Valid
Not valid
Valid
Not valid
Copy-on-Write Snapshot
Valid
Valid
Valid
Valid
Valid
Not valid
- MU# for TrueCopy/Universal Replicator/global-active device: Defines the mirror unit number (0 to 3) if using redundant mirror for the identical LU on TC/UR/GAD. If this number is omitted, it is assumed to be (MU#0). You can specify only MU#0 for TrueCopy, and 4 MU numbers (MU#0 to 3) for Universal Replicator and global-active device. When you enter the MU number for a TC/UR/GAD pair into the configuration definition file, add an "h" before the number, for example, "h0" or "h1". Note: When you enter the MU number for a TC/UR/GAD pair into the configuration definition file, if you specify the number without adding an "h" before, for example, "0" or "1", it might not be recognized as a TC/UR/GAD pair and might not be operated.
State/Feature
SMPL
P-VOL
S-VOL
MU#0
MU#1 to 3
MU#0
MU#1 to 3
MU#0
MU#1 to 3
TrueCopy
Valid
Not valid
Valid
Not valid
Valid
Not valid
Universal Replicator/global-active device
Valid
Valid
Valid
Valid
Valid
Valid
Specifying Port#
The following "n" shows unit ID when the server is connected to two or more storage systems (for example, CL1-A1 = CL1-A in unit ID 1). If the "n" option is omitted, the unit ID is 0. The port is not case sensitive (for example, CL1-A = cl1-a = CL1-a = cl1-A).
|
Port |
Basic |
Option |
Option |
Option |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
CL1 |
An |
Bn |
Cn |
Dn |
En |
Fn |
Gn |
Hn |
Jn |
Kn |
Ln |
Mn |
Nn |
Pn |
Qn |
Rn |
|
CL2 |
An |
Bn |
Cn |
Dn |
En |
Fn |
Gn |
Hn |
Jn |
Kn |
Ln |
Mn |
Nn |
Pn |
Qn |
Rn |
The following ports can only be specified for 9900V:
|
Port |
Basic |
Option |
Option |
Option |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
CL3 |
an |
bn |
cn |
dn |
en |
fn |
gn |
hn |
jn |
kn |
ln |
mn |
nn |
pn |
qn |
rn |
|
CL4 |
an |
bn |
cn |
dn |
en |
fn |
gn |
hn |
jn |
kn |
ln |
mn |
nn |
pn |
qn |
rn |
For 9900V, CCI supports four types of port names for host groups:
- Specifying the port name without a host group:
CL1-A for a RAID storage system
CL1-An, where n = unit ID for multiple RAID storage systems
- Specifying the port with a host group:
CL1-A-g, where g = host group
CL1-An-g, where n-g = host group g on CL1-A in unit ID n
The following ports can only be specified for TagmaStore USP/TagmaStore NSC and USP V/VM:
|
Port |
Basic |
Option |
Option |
Option |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
CL5 |
an |
bn |
cn |
dn |
en |
fn |
gn |
hn |
jn |
kn |
ln |
mn |
nn |
pn |
qn |
rn |
|
CL6 |
an |
bn |
cn |
dn |
en |
fn |
gn |
hn |
jn |
kn |
ln |
mn |
nn |
pn |
qn |
rn |
|
CL7 |
an |
bn |
cn |
dn |
en |
fn |
gn |
hn |
jn |
kn |
ln |
mn |
nn |
pn |
qn |
rn |
|
CL8 |
an |
bn |
cn |
dn |
en |
fn |
gn |
hn |
jn |
kn |
ln |
mn |
nn |
pn |
qn |
rn |
|
CL9 |
an |
bn |
cn |
dn |
en |
fn |
gn |
hn |
jn |
kn |
ln |
mn |
nn |
pn |
qn |
rn |
|
CLA |
an |
bn |
cn |
dn |
en |
fn |
gn |
hn |
jn |
kn |
ln |
mn |
nn |
pn |
qn |
rn |
|
CLB |
an |
bn |
cn |
dn |
en |
fn |
gn |
hn |
jn |
kn |
ln |
mn |
nn |
pn |
qn |
rn |
|
CLC |
an |
bn |
cn |
dn |
en |
fn |
gn |
hn |
jn |
kn |
ln |
mn |
nn |
pn |
qn |
rn |
|
CLD |
an |
bn |
cn |
dn |
en |
fn |
gn |
hn |
jn |
kn |
ln |
mn |
nn |
pn |
qn |
rn |
|
CLE |
an |
bn |
cn |
dn |
en |
fn |
gn |
hn |
jn |
kn |
ln |
mn |
nn |
pn |
qn |
rn |
|
CLF |
an |
bn |
cn |
dn |
en |
fn |
gn |
hn |
jn |
kn |
ln |
mn |
nn |
pn |
qn |
rn |
|
CLG |
an |
bn |
cn |
dn |
en |
fn |
gn |
hn |
jn |
kn |
ln |
mn |
nn |
pn |
qn |
rn |