Not all TrueCopy for Mainframe operation options are supported by Business Continuity Manager. The following table shows the default values used when you run the operation using Business Continuity Manager. Use CCI to change these options.
|
Operation |
CCI command and options |
Option |
Default value used by BCM |
|---|---|---|---|
|
Pair create: YKMAKE |
Not specifiable (fixed to 32) |
Initial Copy Priority |
Disabled1 |
|
raidcom add remote_copy_pair -cfw_svol |
CFW Data |
Secondary Volume Copy |
|
|
raidcom add remote_copy_pair -dfw_svol |
Whether the primary storage system keeps using the pair or splits the pair if DFW data cannot be copied to the S-VOL |
Enable (keep using the pair) |
|
|
Pair split: YKSUSPND |
raidcom modify remote_copy_pair -operation split -transfer_ssb |
SSB Transfer (F/M = FB) |
Disable |
|
raidcom modify remote_copy_pair -operation split -pvol_write |
Primary Volume Write |
Depends on Primary Volume Fence Level |
|
|
Pair resync: YKRESYNC |
Not specifiable (fixed to 32) |
Copy Priority |
Disable1 |
|
Add remote connection: YKBLDPTH |
raidcom modify rcu -rcu_option |
Minimum Number of Paths |
1 |
|
raidcom modify rcu -rcu_option |
RIO MIH Time |
15 seconds |
|
|
raidcom modify rcu -rcu_option |
FREEZE Option |
Disable |
|
|
raidcom modify rcu -rcu_option |
Round Trip Time |
1ms |
|
|
raidcom modify remote_replica_opt -cu -pprc_opt |
PPRC support by host |
Yes or No2 |
|
|
raidcom modify remote_replica_opt -service_sim |
Services SIM of Remote Copy |
No Report |
|
|
Notes:
|
|||