You can use the following TSO commands in your CGROUP FREEZE/RUN workflow:
- Use CESTPATH to recover a blocked primary-secondary path. Make sure to use the same parameters as when the path was established.
- After reestablishing the primary-secondary path that was blocked, use CESTPAIR/RESYNC to resynchronize the TCz pairs split by CGROUP/FREEZE.
- After reestablishing the primary-secondary path that was blocked, use CDELPAIR to release the pairs split by CGROUP/FREEZE. If CDELPAIR is issued to a pair whose primary-secondary path is still blocked, the primary system rejects the command (F/M=0F, TCz reason code=5A).
- Use CRECOVER to change a split S-VOL to simplex. This command is issued to the S-VOL and does not affect the split P-VOL.
- Use CQUERY to generate output about paths and volumes after running CGROUP FREEZE/RUN. See the next section for examples.