The Quick Format function allows you to format internal volumes (LDEVs) in the background. While Quick Format operations are in process, you can perform other tasks to configure the storage system. The Quick Format functions enable you to set the system configurations such as path definition, file system creation, TrueCopy pair creation, before the completion of formatting.
Formatting in the background can impact the performance. Therefore, if you are performing I/O operations from the host during the Quick Format operation, monitor the performance while using the volume.
During the Quick Format operation, shared resources such as MP units and cache paths are used, which might impact all host I/O operations currently running within the storage system.
Do not start more than eight Quick Format operations at the same time. You should start up to eight Quick Format operations, and then start four more Quick Format operations at a time while verifying the host I/O performance.
| Item | Description | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Prerequisite | The internal volume must be in blocked status. | ||||||||
| Number of parity groups that can undergo Quick Format |
|
||||||||
| Concurrent Quick Format operations | While one Quick Format operation is in progress, additional Quick Format operation can be performed. Even in this case, the total number of entries in the parity group currently undergoing Quick Format and the parity group undergoing additional Quick Format must not exceed 72 entries. | ||||||||
| Quick Format preliminary processing | At the beginning of the Quick Format operation, Quick Format preliminary processing is performed to generate management information. While preliminary processing is in progress, I/O access from the host is not possible as with a normal formatting. | ||||||||
| Blocking and restoring a volume |
If a volume undergoing Quick Format is blocked, the storage system recognizes that the volume is undergoing Quick Format. After the volume is restored, the status of the volume changes to Normal (Quick Format). The parity groups in which all volumes undergoing Quick Format are blocked are also included in the number of entries in parity groups currently undergoing Quick Format. To calculate the number of parity groups that have not undergone but can undergo Quick Format, use the following formula: 72 – X – Y Where: X: The number of entries in parity groups in which Quick Format is being performed. Y: The number of entries in parity groups in which all volumes are blocked during the Quick Format operation |
||||||||
| Behavior when the storage system is powered off and back on | The Quick Format operation resumes when power is turned back on. | ||||||||
| Restrictions |
|
||||||||
| SIM output after completion of Quick Format | When Quick Format is performed, SIM=0x410100 is output after the completion of the formatting process. If multiple Quick Format operations are performed, SIM=0x410100 is output when all formatting processes are complete. |