Configuration of NVMe over Fabrics

Provisioning Guide for Open Systems for VSP One Block 85

Version
10.5.x
FileSize
3643 KB
Audience
anonymous
Part Number
MK-26VSP1B033-03
ft:lastEdition
2026-06-23
Product
SVOS

NVMe over Fabrics (NVMe-oF) is an extension protocol that enables communication over Fibre Channel fabrics or Ethernet fabrics using NVMe (Non-Volatile Memory Express) communication technology. By using NVMe-oF, communication between the host and the storage system can be accelerated.

In a Fibre Channel environment, NVMe-oF technology supports the NVMe-oF communication protocol on FC-SAN (Fibre Channel storage area network) using the existing Fibre Channel network devices.

In an Ethernet environment, NVMe-oF technology using TCP/IP is called NVMe/TCP. NVMe/TCP supports the NVMe-oF communication protocol on IP-SAN using the existing Ethernet network devices. VSP One B85 supports the NVMe-oF communication protocol using NVMe-oF starting with A0-05-41-xx.

To configure a system consisting of an open host and a storage system using the NVMe-oF communication protocol, register a logical volume of the storage system as a namespace on the NVM subsystem, and then configure a data I/O route from the host to the logical volume.

The following configuration shows a connection between the host and the storage system using NVMe-oF and NVMe/TCP.


Comparison of FC-NVMe and NVMe/TCP

Conventional Fibre Channel and iSCSI require an LU mapping for a port to manage an access route between the host and the logical volume. NVMe-oF, on the other hand, requires the following system components to be configured on the storage system between the host and the logical volume.

NVM subsystem
A flash memory storage control system that supports the NVMe-oF communication protocol with one or more namespaces, and one or more communication ports (NVM subsystem ports). A default name that is automatically defined by the system cannot be specified.
These characters cannot be used for the NVM subsystem: \ / : , ; * ? " < > |
Namespace
A flash memory space formatted into a logical block.
These characters cannot be used for the namespace nickname: \ / : , ; * ? " < > |
NVM subsystem port
An FC port set to NVMe mode.
Host identification (host NQN)
Host name qualifier.
These characters cannot be used for the host NQN nickname: \ / : , ; * ? " < > |
If the specified host NQN is registered on multiple NVM subsystems, the setting applies to all NVM subsystems.
Host-namespace path
Access permission to the namespace for each host NQN registered on the NVM subsystem.