An example of the ICKDSF FLASHCPY QUERY command follows:
FLASHCPY QUERY UNIT(X'7000')
An example of the FLASHCPY QUERY command follows:
FLASHCOPY VOLUME CAPABILITY INFORMATION TABLE
MAXIMUM MAXIMUM
EXISTING ALLOWED RELATIONS
RELATIONS RELATIONS EXCEEDED CAPABILITY
--------- --------- --------- ----------
1 65534 NO SRC CAP
TGT CAP
CAPABILITY LEGEND
ASY PVOL = ASYNCHRONOUS PPRC REMOTE COPY PRIMARY
CC SRC = CONCURRENT COPY SOURCE
FORCE CG = GLOBAL MIRROR CONSISTENCY GROUP BEING FORCED
INACCESS = VOLUME INACCESSIBLE, DATA NOT OBTAINABLE
INHIBIT = FLASHCOPY INHIBITED ON THIS-VOLUME
MAX EXCD = MAXIMUM RELATIONS EXCEEDED AT-VOLUME OR ESS LEVEL
NEITHER = VOLUME NEITHER FC SOURCE NOR FC TARGET CAPABLE
PPRC PRI = PPRC PRIMARY
PPRC SEC = PPRC SECONDARY
PHASE 1 = PHASE 1 (VERSION 1) RELATIONSHIP EXISTS ON VOLUME
SGC SRC = SAFEGUARDED COPY SOURCE
SGC RTE = SAFEGUARDED COPY RECOVERY TARGET RELATIONS EXIST
SGC ARE = SAFEGUARDED COPY ACTIVE RESERVATION EXIST
SRC CAP = FLASHCOPY SOURCE CAPABLE
TGT CAP = FLASHCOPY TARGET CAPABLE
XRC SRC = XRC SOURCE
The following table shows the information displayed after executing the FLASHCPY QUERY command.
|
Item |
Value |
Description |
|---|---|---|
|
EXISTING RELATIONS |
Number of relationships |
Displays the number of relationships in the specified volumes. |
|
MAXIMUM ALLOWED RELATIONS |
Number of relationships |
Displays the maximum number of relationships that can be created in the specified volumes. |
|
MAXIMUM RELATIONS EXCEEDED |
NO |
Specifies that the number of relationships in the specified volume does not reach the maximum number of relationships that can be created in the specified volume. |
|
YES(VOL) |
Specifies that the maximum number of relationships that can be created in the specified volume has already been created. |
|
|
YES(ESS) |
Specifies that the maximum number of the relationships that can be created in the storage system has already been created. |
|
|
CAPABILITY |
SRC CAP |
The specified volume can be used as an S-VOL for Compatible FlashCopy® V2. |
|
TGT CAP |
The specified volume can be used as a T-VOL for Compatible FlashCopy® V2. |
|
| XRC SRC | The specified volume is a P-VOL of the XRC pair. | |
|
NEITHER |
The specified volume cannot be used as an S-VOL or T-VOL for Compatible FlashCopy® V2. |
|
|
PPRCOPY PRI |
The specified volume is a copy source volume used by TrueCopy for Mainframe. |
|
|
PPRCOPY SEC |
The specified volume is a copy target volume used by TrueCopy for Mainframe. |
|
|
CC SRC |
The specified volume is a copy source volume used by Concurrent Copy. |
|
|
INHIBIT |
The specified volume cannot be used by Compatible FlashCopy® V2. |
|
|
MAX EXCD |
Specifies that the maximum number of relationships that can be created in the specified volume has already been created. |
|
|
PHASE 1 |
Specifies that a Version 1 relationship exists in the specified volume. FlashCopy® V1 is not supported. |
|
|
INACCESS |
Specifies that you cannot access the specified volume. |
|
| ASY PVOL | The specified volume is a primary volume of Asynchronous PPRC remote copy. Compatible FlashCopy® V2 does not support this function. For details, see the IBM® documentation. | |
| FORCE CG | The Global Mirror consistency group is being forced for the specified volume. Compatible FlashCopy® V2 does not support this function. For details, see the IBM® documentation. | |
| SGC SRC | The specified volume is the source volume in a Safeguarded Copy relationship. Compatible FlashCopy® V2 does not support this function. For details, see the IBM® documentation. | |
| SGC RTE | The specified volume is a recovery target in a Safeguarded Copy relationship. Compatible FlashCopy® V2 does not support this function. For details, see the IBM® documentation. | |
| SGC ARE |
The specified volume has an Active Reservation in the Safeguarded Copy relationship.Compatible FlashCopy® V2 does not support this function. For details, see the IBM® documentation. |