The following table describes the parameters you can use with the ANTRQST macro REQUEST = FCQUERY.
|
Parameter |
Value |
Description |
|---|---|---|
|
DEVN |
Device number |
Specifies the number (device address) of the device on which you want to execute the FCQUERY command. |
|
QRYSIZE |
Data length |
Specifies the length of data obtained with QRYINFO. |
|
FORMAT |
FQMAP |
Obtains QUERY information using the ANTFQMAP macro format. For details about the format, see the IBM® manual or the macro source. |
|
NO |
Obtains QUERY information with the format not using the ANTFQMAP macro command. NO is the default setting. |
|
|
QRYINFO |
QUERY Information (Return Value) |
Obtains information such as pair volume attributes of Compatible FlashCopy® V2 relationships and the number of relationships. For details about the information, see the IBM® DFSMS Advanced Copy Services manual. |
|
RETINFO |
Return value |
Obtains the return code and the reason code of the execution results. For details about the codes, see the IBM® DFSMS Advanced Copy Services manual. |
|
REMOTE |
YES |
The request is to a device that not directly connected to the host on which the macro is performed. |
|
NO |
The request is to a device that is connected to the local host. NO is the default setting. |
|
|
QRYSERIAL |
Device number |
Specifies the device number of the S-VOL which you want to perform the FCQUERY command. Use this parameter when REMOTE is YES. |
|
QRYLSS |
CU number |
Specifies the CU number of the S-VOL which you want to perform the FCQUERY command. Use this parameter when REMOTE is YES. |
|
QRYSSID |
SSID |
Specifies the SSID of the CU on which you establish the FlashCopy® relationship. Use this parameter when REMOTE is YES. |