| Notification Alert |
- Host Report: Send alert notifications only for SIMs that are reported to the host.
- All: Send alert notifications for all SIMs.
This setting applies to Email, Syslog, and SNMP.
|
| SNMP Agent |
- Enable: Send SIM alerts by SNMP trap, and accept GET REQUEST, GETNEXT REQUEST, and GETBULK REQUEST.
- Disable: Do not send SIM alerts by SNMP trap, and do not accept GET REQUEST, GETNEXT REQUEST, or GETBULK REQUEST.
GETBULK REQUEST is supported only for SNMP versions v2c and v3.
|
| SNMP Version |
Select the SNMP protocol version. |
| Sending Trap Setting |
- Community
- Community name accepting the SNMP trap report.
- Set this item when the SNMP version is v1 or v2c.
- Send Trap to
- IP address that reports the SNMP trap.
- User Name
- User name used for the SNMP trap report.
- Set this item when the SNMP version is v3.
- Authentication - Mode
- Authentication mode is enabled or disabled.
- Set this item when the SNMP version is v3.
- Authentication - Protocol
- Authentication method when authentication by password is enabled.
- Set this item when the SNMP version is v3.
- Encryption - Mode
- Enabled or disabled.
- Set this item when the SNMP version is v3.
- Encryption - Protocol
- Encryption method when encryption is enabled.
- Set this item when the SNMP version is v3.
|
| Request Authentication Setting |
- Community
- Community name that accepts the GET REQUEST, GETNEXT REQUEST, and GETBULK REQUEST.
- Set this item when the SNMP version is v1 or v2c.
- GETBULK REQUEST is supported only for SNMP versions v2c and v3.
- Requests Permitted
- IP address that accepts GET REQUEST, GETNEXT REQUEST, and GETBULK REQUEST.
- Set this item when the SNMP version is v1 or v2c.
- GETBULK REQUEST is supported only for SNMP versions v2c and v3.
- User Name
- User name that accepts GET REQUEST, GETNEXT REQUEST, and GETBULK REQUEST.
- Set this item when the SNMP version is v3.
- Authentication - Mode
- Authentication mode by password is enabled or disabled.
- Set this item when the SNMP version is v3.
- Authentication - Protocol
- Authentication method when authentication by password is enabled.
- Set this item when the SNMP version is v3.
- Encryption - Mode
- Enabled or disabled.
- Set this item when the SNMP version is v3.
- Encryption - Protocol
- Encryption method when encryption is enabled.
- Set this item when the SNMP version is v3.
|
| System Group Information - Storage System Name |
Name of the storage system. This setting is required.
- Maximum number of characters: 180
- Allowed characters: alphanumeric (ASCII codes) and symbols
- Do not use these symbols: \ , / ; : * ? ” < > | & % ^
- Do not enter a blank for the first or last character.
If you change this item, the storage system name in the Storage System window of the maintenance utility and Web Console is also changed.
|
| System Group Information - Contact |
Contact information such as administrator name and telephone number.
- Maximum number of characters: 180
- Allowed characters: alphanumeric (ASCII codes) and symbols
- Do not use these symbols: \ , / ; : * ? ” < > | & % ^
- Do not enter a blank for the first or last character.
If you change this item, the contact in the Storage System window of the maintenance utility and Web Console is also changed.
|
| System Group Information - Location |
Installation location of the storage system.
- Maximum number of characters: 180
- Allowed characters: alphanumeric (ASCII codes) and symbols
- Do not use these symbols: \ , / ; : * ? ” < > | & % ^
- Do not enter a blank for the first or last character.
If you change this item, the location in the Storage System window of the maintenance utility and Web Console is also changed.
|