The main window of the VSP One Block Administrator web-based GUI has a navigation bar along the top, a navigation tree along the left side, and a large dashboard that displays key storage system and storage resource information. Notifications of events (operation results and other information) and notifications of warnings or failures are also displayed in the VSP One Block Administrator main window.
Navigation Bar
- Health Status
- Displays the current storage system status.
- A status such as Error or Warning is displayed when one of the following events is detected:
- The pool usage rate exceeds the threshold value.
- One or more pools are blocked.
- An error occurs during an operation to back up or restore a snapshot.
- A service information message (SIM) is detected.
SIMs are generated to identify normal operations (for example, GAD pair status changes) as well as service requirements and error conditions.
- Management Tools
- Launches the embedded management tools:
- Maintenance Utility
Launches the maintenance utility in a separate browser tab.
- Command Console
Opens the command console window for embedded CCI.
- Maintenance Utility
- Notification
- Help
Navigation tree
Displays resources for which operations can be performed.
- Monitor
- System Monitor
- Storage
-
- Servers
- Volumes
- Pools
- Ports
- Drives
- Replication
- Remote:
- External Volumes
- External iSCSI Targets
- Quorum Disks
- Remote Path Groups
- Settings
- Clicking each item launches the maintenance utility and takes you directly to the selected item.
- Initial Setup Wizard
- Firmware
- User Settings
- Change Password
- User Administration
- External Authentication
- Alert Notifications
- Licenses
- Network
- Network Settings
- Update Certificate Files
- Date & Time
- Audit Log Settings
- System
- Set up System Information
- Edit Login Message
- Force Release System Lock
- Fail Over ESM
- Download Dump
- Download System Dump
- Download Small System Dump
Dashboard
When you log in to VSP One Block Administrator, the dashboard is displayed in the main window. In the dashboard, you can check the storage system status and the storage system total capacity, and you can view the following:
- Storage System Information
- Displays the storage system name, model, and serial number and the status of resources. You can click the status to view a message about the health status.
- Capacity Usage
- Displays the total and used capacity of the pools in the storage system.
- Servers
- Displays the number of servers that have been registered. You can perform server-related operations by clicking the desired server.
- Volumes
- Displays the number of volumes that have been created. You can perform volume-related operations by clicking the desired volume.
- Total Efficiency
- Displays the extent to which capacity usage has been reduced through the use of functions that improve the efficiency of the storage system, namely the capacity saving feature (deduplication and compression), data backup by using snapshots, and capacity virtualization by using Dynamic Provisioning. Metadata and garbage data generated by the storage system are not included.Note: After a volume is created from a pool and before data is written to the volume, the maximum value (99999.99) is displayed.
- Data Reduction
- Displays the extent to which the stored data capacity has been reduced through the use of the capacity saving feature (deduplication and compression) of the storage system.
- Software Saving
- Displays the extent to which the stored data capacity of volumes has been reduced through the use of the capacity saving feature (deduplication and compression) of the storage system.
- Storage System Performance
- Displays statuses related to the IOPS, response time (time needed to respond to requests from servers), and data transfer speed. You can identify values that differ significantly from normal values at an early stage by periodically checking this information. For example, if there is a significant increase in the response time, a problem might have occurred on the storage system.Note: If performance information cannot be acquired from the storage system, the data displayed on the graphs will not be continuous.
Display of notifications during operation
The following two types of information are sent as notifications to the window while you are logged in to VSP One Block Administrator:
- Notifications of operation results and other information
These notifications are displayed as a snackbar in the upper right corner of the main window and are displayed for only 5 seconds. To view the list of notifications, click
and then select Notification History.
To close notifications in the main window, click the Close button on each snackbar.
- Notifications of error conditions and failures
These notifications are displayed as banners (error banners) along the top of the main window.
To close the banner for an error, click the Close button for the error.
To close all error banners at the same time, click
on the navigation bar and then select Close All Error Banners.