Modifying the storage system port settings

Virtual Storage Platform One Block Administrator User Guide for VSP One Block 85
Version
A0-05-4x
10.5.x
Audience
anonymous
Part Number
MK-26VSP1B025-02
ft:lastEdition
2026-06-22

You can modify the storage port settings.

  • Identify the following:
    • Port ID
    • Attribute

      For details on configurable attributes, see the Provisioning Guide.

    • Port security
    • Port speed
    • FC, iSCSI, or NVMe/TCP information

      For details on the combination of port speed and FC-related information, see the Provisioning Guide.

  • You must have the following roles:
    • When editing port attributes: Storage Administrator (System Resource Management)
    • When editing other items: Storage Administrator (Provisioning)
  1. From the navigation tree, select Storage > Ports.
  2. From the inventory of ports, select the checkbox for the target port, and then click Edit Port in the action bar.
  3. Check and modify the settings.
    Note:
    • For a channel board (10 Gbps, iSCSI (optical)) port, set 10 Gbps for Port Speed. If you specify a different value, it will be ignored.
    • For a channel board (25Gbps iSCSI (Optical)) port, do not specify the IPv6 DEFAULT GATEWAY if you are using a gateway address that uses Route Advertisement (RA).

      If there are multiple IPv6 gateway addresses in the same network, performance delays might occur.

  4. Click Submit.
  5. Click the port ID to open the details page, and then verify that the settings are correctly specified.