If you want to replace a drive that is subject to frequent response delays, take action according to the following procedure.
-
Verify the ID of the drive to be replaced and the ID of the storage node where
the drive is installed.
Also, note down the serial number of the drive to be replaced. This will be used to identify the target drive to be replaced.
REST API: GET /v1/objects/drives
CLI: drive_list
- See Performing maintenance blocking for storage nodes in the VSP One SDS Block and SDS Cloud System Administration to perform maintenance blocking for the target storage node.
- Perform step 1 to 21 for the drive to be replaced according to Replacing drives (Cloud for AWS) in the VSP One SDS Block and SDS Cloud System Administration.
- See Performing maintenance recovery for storage nodes (Cloud for AWS) in the VSP One SDS Block and SDS Cloud System Administration to perform maintenance recovery for the storage node.
- Perform steps 1 to 5 for the created drive according to Expanding a storage pool in the VSP One SDS Block and SDS Cloud System Administration.
- Perform steps 24 to 29 for the drive to be replaced according to Replacing drives (Cloud for AWS) in the VSP One SDS Block and SDS Cloud System Administration.