Registering the service ID of the storage cluster

Virtual Storage Platform One SDS Block Bare Metal Setup and Configuration
Version
1.19.x
Audience
anonymous
Part Number
MK-24VSP1SDS025-03
ft:lastEdition
2026-07-06
CAUTION:

Perform the following procedure only when instructed to do so by the Hitachi maintenance personnel.

To make configured storage clusters uniquely recognizable, you can set service IDs for them.

Run the REST API for registering service IDs of the storage clusters from the controller node that you have already accessed.

Before you begin

  • Required role: Service or Storage for VSP One SDS Block

  1. If you perform the operation from the controller node, start the terminal.
  2. Register the service ID of the storage cluster. Specify the 13-digit service ID that the Hitachi maintenance personnel provided as a service ID.

    • serviceId: 13-digit service ID that the Hitachi maintenance personnel provided

    REST API: POST /v1/objects/storage/actions/set-service-id/invoke

    The following example shows how a REST API is executed by using curl for VSP One SDS Block at IP address 192.168.1.100 with the username as admin and the password as password.

    curl -u admin:password -i -X POST -H "Content-Type: application/json" -H "Expect:" -d '{ "serviceId":"ABCD123456789" }' https://192.168.1.100/ConfigurationManager/simple/v1/objects/storage/actions/set-service-id/invoke
  3. Verify the state of the job. Run either of the following commands with the job ID specified.

    REST API: GET /v1/objects/jobs/<jobId>

    CLI: job_show

    If the job state is "Succeeded", the job is completed.

  4. Obtain information about the storage cluster to verify the registered service ID.

    REST API: GET /v1/objects/storage

    CLI: storage_show

    Verify that the obtained serviceId is the same as the 13-digit service ID that the Hitachi maintenance personnel provided.

    If the service ID has not been registered or the registered service ID has been deleted, the value of the obtained serviceId is null.

    Note:

    • Verify that you specify the 13-digit service ID that the Hitachi maintenance personnel provided. If you inadvertently specify an incorrect service ID, run the REST API described in step 2 with the correct service ID specified for the serviceId parameter so that you can update the registered service ID. You can also delete the registered service ID by running the REST API described in step 2 with empty characters specified for the serviceId parameter.

    • If you want to perform initial installation again, you need to set the same value as the service ID that you set in this procedure again.