Create remote path group as follows.
For a configuration in which communication between ports is not possible (such as when each compute port belongs to a different subnet), performing the following procedure might create remote paths that cannot communicate.
In such a case, see the VSP One SDS Block and SDS Cloud Universal Replicator to create remote path groups.
- Required role: RemoteCopy
-
Open the Remote Path Groups window or Storage Controllers detailed information
window, and click either of the following icons.
The following dialog appears.
-
Enter each of the following parameters:
-
MODEL: ID indicating the remote storage system model
-
SERIAL NUMBER: Serial number of the remote storage system
-
PATH GROUP ID: Remote path group ID
-
STORAGE NODE NAME (STORAGE CONTROLLER ID): Storage node name (Storage controller ID)
Selecting a storage node name displays the compute port name in LOCAL PORT@STORAGE NODE NAME. The displayed port is the compute port linked to the storage node to which the selected storage controller belongs. This is displayed in the format of "compute-port name (local-port number)@storage-node name."
-
REMOTE PORT: Port number of the remote storage system (CLx-y format)
-
REMOTE IP ADDRESS: IP address of the remote storage system
-
REMOTE TCP PORT: TCP port number of the remote storage system
-
RIO TIMEOUT: Timeout setting value for the RIO (remote IO) between the local storage system and remote storage system (unit: seconds)
-