Obtain the necessary IP addresses to be used for the replacement server. Servers shipped from the factory have not yet had the nas-preconfig script run on them, so a replacement server will not have any IP addresses pre-configured for your use.
The following settings are required to configure the replacement server:
- Eth1 (Admin service private IP address) – Customer IP address
- Cluster – IP address is temporary removed after server joined to Cluster
- Single Node – IP address is permanent, used to administer the node
- Eth1 (Admin Service Private netmask) – Customer netmask
- Eth1 (Physical Node IP address) – Customer IP address from defective node
- Eth1 (Physical Node netmask) - Customer netmask from defective node
- Customer Gateway – Obtain from defective node or customer
- Domain Name – Obtain from defective node or customer
- Host name – Obtain from defective node or customer
When the replacement node is added to the cluster, it removes the temporary admin service IP address, and reconfigures the server to the previous server settings.
The reconfigured settings are:
- Gateway
- Domain name
- Host name