The following figure shows the rear panel
components for the Hitachi VSP One File 32 Gen2 server model.
The following table shows the ports and connectors on the server rear panel:Figure. Server rear panel components
Note: Do not use any ports or connectors that are
not described in this table without guidance from technical support.
| Item | Connectivity | Qty | Description |
|---|---|---|---|
| 1 | 10/25 GbE network ports | 4 | Connection to external 10/25 Gbps ethernet data network. |
| 2 | 10/25 GbE clustering ports | 2 |
For cluster management and heartbeat.
|
| 3 | FC ports | 2 | Direct connection to disk systems or tape libraries or SAN fabric. |
| 4 | PSU 1 | 1 | Power Supply Unit 1 CAUTION: Do not lift the server by the PSU handle.
|
| 5 | PSU 2 | 1 | Power Supply Unit 2 CAUTION: Do not lift the server by the PSU handle.
|
| 6 | IPMI v2.0 port | 1 | Connection to the internal Ethernet switch of the rack |
| 7 & 8 | USB Ports | 4 | USB port. (Reserved for Customer Service Engineer access only.) |
| 9 | ETH1 1000baseT Ethernet | 1 | Management port. Connect to the internal ethernet switch of the rack. |
| 10 | ETH0 1000baseT Ethernet | 1 | External system management. Connect to the customer's management switch. |
| 11 | Video port | 1 | Video management interface port. (Reserved for Customer Service Engineer access only.) |
| 12 | RS-232 | 1 | Management interface. (Reserved for Customer Service Engineer access only.) |