Configuring SSC access

Virtual Storage Platform One File Administrator User Guide
Version
1.7.x
Audience
anonymous
Part Number
MK-24VSP1F003-10
ft:lastEdition
2026-07-13

You can enable or disable, and specify the hosts allowed to access the VSP One File server using the SSC protocol.

  1. Navigate to Configuration > Server > Management Access.
  2. In the Management Access page, click the Configuration tab, and then click the edit icon for SSC Access Configuration.
  3. In the Edit SSC Access Configuration dialog box, set the Enable SSC Access toggle switch to Enabled, and then complete the following information:
    1. In the Port Number box, enter the port number that the VSP One File server uses to communicate through the SSC protocol. The default is port 206.
      SSC must be enabled on port 206 to perform upgrades, run diagnostics, and use accelerated data copy (ADC).
    2. In the Maximum Number of connections box, enter the maximum number of simultaneous connections to the server. File Administrator supports a maximum of 10 simultaneous connections.
    3. (Optional) To restrict SSC protocol access to allowed hosts, set the Restrict Access To Allowed Host toggle switch to Yes.
    4. (Optional) In the Allowed Hosts box, enter the Hostname or IP address of the host that is allowed to access the VSP One File server using the protocol, and then click Add. To remove a host, click the delete icon.
      You can specify an IP address using the * character, for example, 10.168.*.* or 172.*.*.*.
  4. Click Save.