The following figure shows the system configuration for data migration using global-active device. The source and target storage systems must both support global-active device.
The following table specifies the supported configurations for volume migration when the target storage system is VSP One Block 85.
| Source storage system | Target storage system |
|---|---|
|
VSP 5100, 5200, 5500, 5600 (90-09-29 or later) |
VSP One Block 85 |
The following table specifies the supported configurations for volume migration when the target storage system is VSP One Block 20 series.
| Source storage system | Target storage system | ||
|---|---|---|---|
| Storage system | DKCMAIN version | Storage system | DKCMAIN version |
| VSP E590, VSP E790, VSP E990 | 93-07-24 or later |
VSP One B26, VSP One B28 |
A3-03-01 or later |
| VSP E1090 | 93-07-27 or later | VSP One B20 series | A3-04-21 or later |
| VSP G/F350, G/F370, G/F700, G/F900 | 88-08-16 or later | VSP One B24 | A3-04-21 or later |
| 88-08-14 or later | VSP One B26, VSP One B28 | A3-03-01 or later | |
| VSP G200, G/F400, G/F600, G/F800 and | 83-06-25 or later | VSP One B26, VSP One B28 | A3-04-01 or later |
| VSP 5000 series* (90-09-26 or later) | 90-09-26 or later | VSP One B20 series* | A3-04-01 or later |
|
* Only unpaired volumes can be used. If the volume is part of any of the following, the volume cannot be used for online data migration:
|
|||
For the latest information about supported configurations, see the Hitachi Vantara interoperability matrix: https://compatibility.hitachivantara.com/.