Creating a resource group when the P-VOL is registered to a VSM

Global Active Device for VSP One Block

Version

10.5.x

File Size

25537 KB

Audience

anonymous

Part Number

MK-23VSP1B011-11

ft:lastEdition

2026-06-23

You can create GAD pairs using volumes in virtual storage machines. When you want to create a GAD pair using volumes in VSMs, the VSM for the volume in the secondary site must have the same model and serial number as the VSM for the volume in the primary site.

Specifying serial numbers in CCI commands

For VSP One Block 85, add a “9” at the beginning of the serial number. For example, for serial number 11111, enter 911111.
For VSP 5000 series, add a “5” at the beginning of the serial number. For example, for serial number 11111, enter 511111.

Specifying and viewing VSP One Block storage systems

To specify VSP One B24, enter RH20ML2.
To specify VSP One B26, enter RH20M2.
To specify VSP One B28, enter RH20MH2.
To specify VSP One B85, enter RH20ETP.
VSP One B24 is displayed as RH20ML2 in command output.
VSP One B26 is displayed as RH20M2 in command output.
VSP One B28 is displayed as RH20MH2 in command output.
VSP One B85 is displayed as RH20ETP in command output.

Specifying and viewing VSP 5000 series storage systems

To specify VSP 5100 or VSP 5500, enter R900F.
To specify VSP 5100H or VSP 5500H, enter R900G.
To specify VSP 5200 or VSP 5600, enter RH10HF.
To specify VSP 5200H or VSP 5600H, enter RH10HG.
VSP 5100 and VSP 5500 are displayed as R9F in command output.
VSP 5100H and VSP 5500H are displayed as R9G in command output.
VSP 5200 and VSP 5600 are displayed as RH10HF in command output.
VSP 5200H and VSP 5600H are displayed as RH10HG in command output.

Specifying and viewing VSP E series storage systems

To specify VSP E590, enter M900S.
To specify VSP E590H, enter M900SG.
To specify VSP E790, enter M900M.
To specify VSP E790H, enter M900MG.
To specify VSP E990, enter M900H.
To specify VSP E1090, enter RH10MHF.
To specify VSP E1090H, enter RH10MHG.
VSP E590 is displayed as M9S in command output.
VSP E590H is displayed as M9SG in command output.
VSP E790 is displayed as M9M in command output.
VSP E790H is displayed as M9MG in command output.
VSP E990 is displayed as M9H in command output.
VSP E1090 is displayed as RH10MHF in command output.
VSP E1090H is displayed as RH10MHG in command output.

Specifying and viewing VSP G130, G/F350, G/F370, G/F700, G/F900 storage systems

To specify VSP G350, enter M850S1.
To specify VSP G370, enter M850S2.
To specify VSP G700, enter M850M3.
To specify VSP G900, enter M850H.
To specify VSP F350, enter M850S1F.
To specify VSP F370, enter M850S2F.
To specify VSP F700, enter M850M3F.
To specify VSP F900, enter M850HF.
VSP G350 is displayed as M850S1 in command output.
VSP G370 is displayed as M850S2 in command output.
VSP G700 is displayed as M850M3 in command output.
VSP G900 is displayed as M850H in command output.
VSP F350 is displayed as M850S1F in command output.
VSP F370 is displayed as M850S2F in command output.
VSP F700 is displayed as M850M3F in command output.
VSP F900 is displayed as M850HF in command output.

Procedure

Display information about the resource group of the primary storage system and check the model and serial number of the virtual storage machine in the primary storage system for which a pair is to be created.

raidcom get resource -key opt -IH0
RS_GROUP        RGID    V_Serial#    V_ID        V_IF    Serial#    V_NUMBER
meta_resource    0      811111        RH20ML2    Y 	811111        0
HAGroup1         1      833333        RH20ML2    Y 	833333        1

Specify the virtual information you checked in step 1 (the model and serial number of the virtual storage machine in the primary storage system) for the virtual information you need to create resource group "HAGroup1" in the secondary storage system.
```
raidcom add resource -resource_name HAGroup1 -virtual_type 833333 RH20ML2 -IH1
```