The following describes the web-based user interface of VSP One Block Administrator and the
information shown on the dashboard.
Navigation Bar
- Health Status
Displays a status such as Error or Warning when one of the following events is detected:
- The pool usage rate exceeds the threshold value.
- One or more pools are blocked.
- An error occurs when backing up or restoring a snapshot.
- A SIM ( System Information Message ), which is generated upon an error or service action, is detected.
- Management Tools
Launches the following tools from VSP One Block Administrator:
- Maintenance Utility
Launches the maintenance utility (a tool for managing storage systems) and performs various tasks such as initial setup during installation.
- Command Console
Launches the command console from VSP One Block Administrator. You can run raidcom commands within the CLI window that opens.
- Maintenance Utility
- Notification History
Provides a history of notifications generated by the system.
- Help
- System Information
Displays System Information about the storage system managed by VSP One Block Administrator.
- Help
Displays the VSP One Block Administrator Help. You can use the Help to view procedures and other information.
- System Information
Navigation tree
Displays resources that you can manage. You can show or hide a resource by clicking the corresponding arrow.
The navigation tree levels are as follows:
- Dashboard
- Monitor
System Monitor
- Storage
Servers, Volumes, Pools, Ports, Drives, External Volumes, External iSCSI Targets
- Replication
The following resources are shown under the "Local" category.
ShadowImage Copy Groups
The following resources are shown under the "Remote" category.
Quorum Disks, Remote Path Groups
- Migration
Migration Pairs
- Settings
-
The following resources are displayed under the "Data at Rest Encryption" category.
Encryption Environmental Settings, Encryption Keys, Key Management Server Settings
- Launches the maintenance utility to configure the following settings.
Navigation tree level
Content to be set
Use the Initial Setup Wizard to configure system information, the date and time, and network settings.
In the Firmware window, update the firmware.
In the Change Password window, change account password.
In the User Administration window, configure accounts for users who will perform management tasks on the storage system.
In the External Authentication window, configure authentication and permissions for the authentication server.
In the User Account Policies window, configure password policies.
In the Alert Notifications window, configure settings to notify administrators of SIMs by email, syslog messages, or SNMP traps.
In the Licenses window, manage licenses, for example, by installing program products and enabling or disabling licenses.
In the Network Settings window, configure settings such as the service IP of the storage system, the IP addresses of management ports of CTL01 and CTL02, subnet mask, default gateway and DNS servers.
In the Select Cipher Suite window, select the cipher suite to use for communication between the management client and storage system.
In the Update Certificate Files window, upload and update the certificate to use to connect to the web server during SSL communication between the management client and storage system.
In the Date & Time window, configure the storage system date and time.
In the Audit Log Settings window, configure settings to forward the storage system audit logs to the syslog server.
In the Setup System Information window, configure system information.
In the Edit Login Message window, edit the message that is shown in the login window.
In the Edit Session Timeout Period window, configure the session timeout time. In the Force Release System Lock window, forcibly release a storage system from the locked state.
Manually fail over the ESM. After fail over, you must log in again to VSP One Block Administrator.
In the Download System Dump window, download a system dump.
In the Download Small System Dump window, download a small system dump.
Tip: For details on the settings to configure, see the maintenance utility Help.For details on the roles required to complete tasks in the maintenance utility and other notes, see the System Administrator Guide.
When closing the maintenance utility window, make sure to log out. If you close the window without logging out, the system might remain in the locked state.
-
Dashboard
When you log in, the dashboard opens. In the dashboard, you can check the storage system status, check the storage system total capacity, and view the following:
- Storage System Information
Displays the storage system name, model name, and serial number, as well as the status of resources. You can click the status to view a message about the health status.
- Capacity Usage
Displays the total capacity (the effective capacity during expansion) and used capacity of the storage system pools.
- Servers
Displays the number of servers that are registered. You can perform server-related tasks by clicking the relevant icons.
- Volumes
Displays the number of volumes that are created. You can perform volume-related tasks by clicking the relevant icons.
- Data Reduction
Displays the extent to which the stored data capacity has been reduced through the storage system capacity saving feature (deduplication and compression).
Note:After a volume is created from a pool and before data is written to the volume, the maximum value (99999.99) is shown.
- Storage System Performance
Displays status related to IOPS, response time (time needed to respond to requests from servers), and data transfer speed. You can identify values that differ significantly from normal values at an early stage by periodically checking this information. In particular, if there is a significant increase in the response time, a problem might have occurred on the storage system.
Note: If VSP One Block Administrator cannot acquire storage system performance information, the graph displays will not be continuous.
Location of notifications
The following two types of information are sent as notifications to the window while you are logged in to VSP One Block Administrator:
- Notifications of task results and other information
These are displayed as a snackbar in the upper-right corner of the window, and are shown for only five seconds.
To view past notifications, click
to open the
notification history window.To close the notifications in the window, click the Close button on each snackbar.
- Notifications of warnings and failures
These are displayed as a banner (error banner) at the top of the window.
To close the notifications in the window, click the Close button on each error banner.
To close multiple error banners at the same time, click
on the navigation bar and select Close All Error Banners.