You can test the communication for an external path by performing a login test for an iSCSI target on an external storage system.
Note: If the login test fails, revise the settings of the iSCSI target so that you can log in, or delete the iSCSI target. If any iSCSI targets to which you cannot log in are registered, an attempt is made to connect to these iSCSI targets when you access an external volume, and load is applied to the storage system or network. This might cause tasks to fail.
- Verify that the external iSCSI targets are registered.
- Obtain the iSCSI port to use for external connections.
- Obtain the following information about the external storage
system containing the volume to use for the quorum disk:
- Name of the iSCSI target
- IP address
- You must have the Storage Administrator (View Only) role.