Arista 7020 status indicators

Installing an HCP SAIN System - Final On-Site Setup
Version
9.7.x
File Size
41914 KB
Audience
anonymous
Part Number
MK-98ARC020-34

Table. Switch LEDs
  LED name LED state Device status
System Status Blinking green System is powering up.
Green Normal operations. Due to power supply and fan redundancy, this LED stays green if a single fan or power supply is missing or in a failed state.
Blue The locater function is active.
Amber Two or more fans (any combination of fan modules or PSU fans) are disconnected or malfunctioning. The switch automatically performs a “graceful shutdown” shortly.
Fan Status Green All fan and power modules are operating normally.
Amber Single fan module is removed or malfunctioning. It is also amber when a PSU is completely removed or has a stuck fan rotor.
Red Two or more fans (any combination of fan modules or PSU fans) are disconnected or malfunctioning. The switch automatically performs a “graceful shutdown” shortly.
PSU [1:2] Status LED Green PSU is functioning and fully operational. AC is present, Aux output is ON, and Main output is ON.
Off PSU has been removed or is not operating properly due to AC cord being unplugged, its fan rotor being stuck, or an internal fault.
Table. Port LEDs
  LED state Status
Off Port link is down.
Green Port link is up.
Yellow Port is software disabled.
Flashing yellow Port failed diagnostics.
Table. Fan status LED (rear)
  LED state Status
Off Fan module is not detected. If it is inserted, it may not be seated properly.
Green

Fan is operating normally. This LED state is exclusive to its fan module, and independent of the states of its neighboring fans and power supplies.

.
Red Fan has failed.
Table. AC power supply status LED (rear)
  Power supply state Status
Green Input power present, normal operation.

OR

Input power present, power supply is not installed in chassis.
Yellow Input power present, power supply fault.
Off No input power supply installed in chassis.