By default, Hitachi Remote Ops is configured to support SNMP version 1 or 2c with the community name public. If you change the community name in HCP or if you select version 3, you need to configure a new SNMP user in Hitachi Remote Ops to match what you specify in HCP. For more information about this, see the Hitachi Remote Ops documentation.
Once SNMP is enabled, the first four nodes in the HCP system monitor for switch SNMP traps. If there are more than four HCP nodes in the system, additional HCP node back-end addresses can be added to the SNMP trap receivers list on the back-end switches. For more information about adding extra nodes back-end address to the SNMP trap receivers list, contact your HCP customer support.
To enable SNMP in HCP for use with Hitachi Remote Ops:
- Log into the HCP System Management Console using the initial user account, which has the security role.
- In the top-level menu of the System Management Console, select .
- In the SNMP Settings section,on the SNMP page:
- Select the Enable SNMP at snmp.hcp-domain-name option.
- Select either Use version 1 or 2c (recommended) or Use version 3.
- If you select Use version 3, specify a username and password in the Username, Password, and Confirm Password fields.
- Optionally, in the Community field, type a different community name.
- Click the Update Settings button.
- In the entry field in the Allow section, type the IP address that you want HCP to use to connect to the server on which Hitachi Remote Ops is installed. Then click the Add button.
- Log out of the System Management Console and close the browser window.