Following is a workflow designated to verify, and if necessary, change the serial number in the HCP system configuration.
Each HCP system is assigned a unique five-digit serial number. With a preassembled system, this number is on a label that’s attached to the side of the system rack at the bottom, just inside the left rear door. With a rackless system, this number is on a label taped to the top of the first node you mount when you assemble the system. When the HCP system software is installed, the serial number is entered as part of the system configuration. You need to verify that the serial number in the system configuration matches the serial number of the label attached to the rack. If the serial numbers don’t match, you need to change the serial number in the system configuration.
- Select from the top-level menu of the System Management Console.
- Verify that the serial number in the Serial Number from Rack Label field is the same as the serial number on the label delivered with the system.
- If the serial numbers are not the same:
- In the Serial Number from Rack Label field, type the serial number from the label attached to the rack.
- Click Update Settings.