Attach the front panel to the server

Installing an HCP RAIN System - Final On-Site Setup
Version
9.7.x
File Size
35463 KB
Audience
anonymous
Part Number
MK-98ARC016-35

The front panel has two pins on either side that fit into holes in the server handles.



The front panel has a lock in the bottom right corner. The lock secures the panel to the server. Each panel comes with two keys. While the lock is unlocked, you cannot remove the key from it.

  1. Insert one of the front panel keys into the front panel lock.
    The key goes into the lock horizontally.

  2. Turn the key one quarter turn clockwise so that the key is vertical.
  3. Align the front panel with the front of the server.
  4. Slide the two pins on the left side of the front panel into the two holes in the left server handle.


  5. Press the tab on the front panel to the left to retract the pins on the right side of the panel.


  6. While pressing the front panel against the server, release the tab so that the pins on the right side of the panel slide into the holes in the right server handle.
  7. Pull gently on the right side of the front panel to ensure that pins on the right are set in the holes. If the right side of the panel moves away from the front of the server, perform step 6 again.
  8. Turn the front panel key one quarter turn counterclockwise so that the key is horizontal.
  9. Remove the key from the lock.
  10. Store both front panel keys in a secure location.